Table of Contents
Advertisement
Editing a Sample (SAMPLE EDIT)
Exchanging (Swapping) Samples Between Pads
Hereʼs how to exchange (swap) the samples that are assigned to two different pads.
1
Hold down the [SHIFT] button and press the pad [5].
The EXCHANGE PAD screen appears.
2
Press the two pads for which you want to exchange the samples.
To cancel exchanging, press the [EXIT] button.
You can use the bank [A/F]‒[E/J] buttons to select a bank before pressing the pads. Itʼs also possible
to exchange samples between different banks.
You may notice a difference in volume when exchanging samples between different banks, due to the
differences in the BANK VOLUME parameters set for each bank.
3
Press the [VALUE] knob or [COPY] button.
The samples for the pads are now exchanged.
Organizing the Samples
>
Advertisement
Table of Contents
