Table of Contents
Advertisement
Customizing This Unit
Customizing the Opening Screen
>
Saving an Opening Image to a Project
Hereʼs how to save your custom image to a project. As an example, the following shows how to change the opening
image of project 01 to your own custom image.
1
Export the project for which you want to change the opening image (project 01 in this example) to an SD
card ("Exporting a Project (EXPORT PROJECT)").
2
Remove the SD card from this unit, and open the contents on your computer.
3
Copy the opening image thatʼs saved in the SD card to the "EXPORT/PROJECT/PROJECT̲01/PICTURE"
folder. Change the filename to "startup̲*.bmp", replacing the asterisk with a number from 1 to 2.
For details on the "/EXPORT/PROJECT/PROJECT̲01/PICTURE" folder, see the folder structure diagram
shown in "Importing/Exporting (Using the SD Card)."
4
Remove the SD card from your computer, and insert it into this unit.
5
Import the project in which the opening image is registered ("Importing a Project (IMPORT PROJECT)").
Your custom opening image is displayed from the next time the unit starts up.
Advertisement
Table of Contents
