Table of Contents
Advertisement
Clock settings
Menu where you can set the time and
type of display.
• In the "settings menu
SETTINGS
Digital clock
Displays the current time in digital
format.
In the event of a temporary power cut,
the digital version will remain selected.
1. Select
Digital clock.
2. Select On.
Touch the CONFIRM
activate the Digital clock mode.
Time display
Activates/deactivates the clock display
when the oven is switched off.
The "Show the time" function is factory
set to Off.
If the "Show the time" function is set to
On, when the appliance is in standby it
displays the current time at low
brightness.
When the "Show the time" function is set
to On, the appliance consumes more
energy than in stand-by mode.
Only for SmegConnect models: if the
"Show the time" function is set to Off the
connectivity switches off automatically
when the clock goes into stand-by.
1. Select
Show the time.
2. Select On.
122 - USE
" touch the CLOCK
button.
button to
3. Touch the CONFIRM
activate the time display.
Clock format
Activates/deactivates the clock display
in the 12 or 24 hour format.
The Time format function is factory set to
24h.
1. Select
Time format.
2. Select 12h or 24h.
3. Touch the CONFIRM
activate the required time format.
Oven settings
Dedicated menu for additional product
functions.
• In the "settings menu
SETTINGS
Keep warm
This mode allows the appliance to keep
cooked food warm (at low
temperatures) after cooking finishes with
a cooking cycle for which a duration
has been set (if this is not manually
interrupted), without altering the taste
and smell obtained during cooking.
The keep warm function will be
activated 5 minutes after cooking has
finished; this is indicated by a series of
beeps (see cooking or function ended).
The temperature of the keep warm
function is set to 80°C.
1. Select
Keep warm.
2. Select On.
3. Touch the CONFIRM
activate the Keep warm mode.
button to
button to
" touch the OVEN
button.
button to
91477A081/A
Advertisement
Table of Contents
