Table of Contents
Advertisement
First heating
1. Set a cooking time of at least one hour (see
paragraph "Using the oven").
2. Heat the empty oven compartment at the
maximum temperature to burn off any
residues left by the manufacturing process.
When heating the appliance
• air the room;
• don't stay.
Materials suitable for use with
microwaves
In general, in order for all of the food to be
reached, the materials used for microwave
cooking must be transparent to microwave
energy.
Below is a table of materials to use and those
not to use:
MATERIALS TO USE:
- Glass (always remove the lids)*
• Baking ware
• Glasses
• Jars
- Porcelain
- Earthenware
- Plastic (only where suitable for microwave
use)*
• Containers
• Plastic wrap (must not come into contact
with the food)
*only if heat-resistant.
MATERIALS NOT TO USE
- Metals (can lead to arcing or sparks)
• Aluminium foil
• Aluminium trays
• Plates
• Metal utensils
• Freezer bags tie wraps
- Wood
- Crystal glasses
- Paper (risk of fire)
- Polystyrene containers (danger of
contamination of foodstuffs)
Dishes must be free of metal
decorations.
Do not use metal accessory trays in the
microwave or combined microwave
functions.
86 - USE
Testing dishes
The microwave function can be used
without any food inside the oven only
for this test.
To check whether the cookware is suitable for
use with microwave cooking, carry out this
simple test:
1. Remove all accessories from the oven
cavity.
2. Place the cookware to be tested on the rack
inserted in the first shelf.
3. Select the microwave function at maximum
power level (e.g. 1000 W).
4. Set a cooking time of 30 seconds.
5. Start cooking.
Unsuitable cookware
Risk of damage to the appliance
• Stop the test immediately if there is a
cracking sound or if sparks are emitted from
the cookware. If this happens, it means that
the cookware is not suitable for microwave
cooking.
At the end of the test the cookware must be
either cold or slightly warm. If the cookware is
hot then it should be considered as unsuitable
for microwave use.
Using the accessories
Racks and trays
Racks and trays have to be inserted into the side
guides until they come to a complete stop.
• The mechanical safety locks that prevent the
rack from being removed accidentally must
face downwards and towards the back of
the oven cavity.
Gently insert racks and trays into the
oven until they come to a stop.
Clean the trays before using them for
the first time to remove any residues left
by the manufacturing process.
91477A081/A
Advertisement
Table of Contents
