Table of Contents
Advertisement
Eco light
For greater energy savings, the lights
inside the oven cavity are automatically
deactivated approximately one minute
after the start of cooking or after the
door is opened.
To stop the appliance from
automatically deactivating the light after
approximately one minute, set this
mode to Off.
The manual on/off control is always
available. Press the
available, to manually activate the oven
light or the
The Eco light function is factory set to
On.
1. Select
Eco light.
2. Select On.
3. Touch the CONFIRM
activate the Eco light mode.
Water hardness
This mode allows you to set the water
hardness value in order to optimise the
descaling process.
The appliance is factory set for water of
medium hardness (3).
1. Select
Water hardness.
2. Scroll to the desired level (from 1 a 5).
3. Touch the CONFIRM
confirm.
If your mains water supply is too hard,
we recommend using a water softener.
Request information on the hardness of
your water from your local water board.
Depending on the water hardness value that
has been set, after the steam functions have
been used for a certain number of hours, the
display will prompt you to carry out the
descaling procedure.
According to the use of the appliance and the
91477A081/A
symbol, when
symbol to deactivate it.
button to
button to
hardness degree of the water (
approximate number of hours is as follows:
Value
°dH
1
0 ÷ 11
2
12 ÷ 17
3
18 ÷ 24
4
25 ÷ 30
5
31 ÷ 50
Automatic wand
Sets the automatic operation mode of
the reservoir filling and draining wand.
1. Select Automatic wand
2. Select On.
3. Touch the CONFIRM
activate the wand automatic operation.
The Automatic wand mode is factory set
to Off.
Display settings
Menu where you can change the
language and modify the display
settings of certain parameters.
• In the "settings menu
DISPLAY SETTINGS
Language
Allows you to select the language of the
display.
1. Select
Language.
2. Scroll through the available languages to
select the required language.
3. Touch the CONFIRM
the language.
Controls lock
Allows the appliance to automatically
lock the controls after one minute of
normal operation without any
intervention from the user.
1. Select
Controls lock.
, the
°dH or °dF)
°dF
Hours
0 ÷ 20
8
21 ÷ 30
7
31 ÷ 42
6
43 ÷ 53
5
54 ÷ 90
4
.
button to
" touch the
button.
button to confirm
USE - 123
Advertisement
Table of Contents
