Ricoh Aficio MP1812L Operating Instructions Manual page 57

Problem Cause
When printing • If the printer
graphics, the out- driver is
put and the screen configured
are different. to use the
graphics
command,
the graphics
command
from the ma-
chine is used
to print.
• If you want
to print ac-
curately, set
the printer
driver to
print with-
out using
the graphics
command.
Page layout is Print areas differ
not as expected. depending on
machine used. In-
formation that fits
on a single page
on one machine
may not fit on a
single page of an-
other machine.
Photo images Some applica-
are coarse. tions print at
lower resolution.
Solid lines are Dither patterns
printed as bro- do not match.
ken lines.
Optional com- Bidirectional
ponents con- communication
nected to the is not working.
machine are not
recognized
when using
Windows 95 /
98 / Me, Win-
dows 2000 / XP,
Windows Serv-
er 2003, and
Windows NT
4.0.
Solution
See the printer driver Help.
Adjust the [Printable area:] setting in the [Printer Configura-
tion...] dialog box on the [Print Settings] tab in the RPCS
printer driver. See the printer driver Help.
Use the application's settings to specify a higher resolution.
Make the following settings with the printer driver:
• Change the [Dithering:] setting on the [Image Adjust-
ments] tab in the [Change User Settings] dialog box, on
the [Print Quality] tab in the RPCS printer driver. See the
printer driver Help.
Set up optional devices on the Properties of the machine.
See the printer driver Help.
Other Printing Problems
4
51