Ricoh Aficio MP1812L Operating Instructions Manual page 22

Troubleshooting When Using the Copy Function
❖ Edit
Problem
When using the Duplex
Margin function, parts
of the original image
are not copied.
2
When using the Duplex
Margin function, parts
of the original image
are not copied.
❖ Combine
Problem
When using Combine,
parts of the image are
not copied.
When using Combine,
parts of the image are
not copied.
Copies are not in cor-
rect order.
16
Cause
You set a wide erased margin.
There is a lack of margin space on
the opposite side of the binding
position.
Cause
You specified a reproduction ra-
tio that does not match the sizes
of your originals and copy paper.
Your originals are not identical in
size and direction.
You placed the originals in the in-
correct order.
Solution
Set a narrower margin with User
Tools. You can set the width be-
tween 0 - 50 mm (0" - 2").
See "Copier Features", General
Settings Guide.
Set a narrower margin with User
Tools. You can set the width be-
tween 0 - 50 mm (0" - 2").
See "Copier Features", General
Settings Guide.
Solution
When you specify a reproduction
ratio using the Manual Paper Se-
lect function, make sure that the
ratio matches your originals and
the copy paper.
(Select the correct reproduction
ratio before using the Combine
function.)
Use originals that are identical in
size and direction.
When placing a stack of originals
in the ADF or ARDF, the last page
should be on the bottom.
If you place an original on the ex-
posure glass, start with the first
page to be copied.