Ricoh Aficio MP1812L Operating Instructions Manual page 23

❖ Duplex (Type 2 only)
Problem
Cannot print in duplex
mode.
Cannot print in duplex
mode.
Cannot print in duplex
mode.
Copies are not in du-
plex order.
When using Duplex,
copy is made Top to
Bottom even though
[Top to Top] is selected.
Parts of the original im-
age are not copied.
Cause
You may have loaded paper on
the bypass tray.
You have loaded paper exceeding
2
90 g/m .
You have selected a tray that is set
to [Off] for duplex printing in
[Tray Paper Settings] under [System
Settings].
You placed the originals in the in-
correct order.
You placed the originals in the
wrong orientation.
The margin is too wide.
When You Cannot Make Copies As Wanted
Solution
Remove paper loaded on the by-
pass tray. Load paper in Tray 1 - 4.
Change the paper.
Select a paper tray in [Tray Paper
Settings] under [System Settings],
and then press [OK]. Then, select
[No Display (Plain Paper)] or [Recy-
cled Paper] for Paper Type, press
[Duplex], and then select [On]. See
"Tray Paper Settings", General
Settings Guide.
When placing a stack of originals
in the ADF or ARDF, the last page
should be on the bottom.
If you place an original on the ex-
posure glass, start with the first
page to be copied.
Place the original in the correct
orientation. See "Original Orien-
tation", Copy Reference.
Set a narrower margin with User
Tools. See "User Tools Menu
(Copier Features)", Copy Refer-
ence.
2
17