Ricoh Aficio MP1812L Operating Instructions Manual page 29

Message
Updating desti-
nation list. Re-
select
destination(s)
or sender's name
later.
You do not have
privileges to
use this func-
tion.
Authentication
failed.
Authentication
failed.
Connection with
LDAP server has
failed. Check
the server sta-
tus.
LDAP server
auth. has
failed. Check
the settings.
Exceeded max.
number of search
results which
can be dis-
played. Max.:
nnn
(A figure is placed at n.)
LDAP server
search timed
out. Check the
server status.
Specified group
contains some
invalid dest. Do
you want to se-
lect only valid
dest.?
Cause
The destination list is being up-
dated from the network using
SmartDeviceMonitor for Admin
or Web Image Monitor.
Use of this function is restricted.
Wrong login user name or password. Confirm correct login user name
Authentication is not possible
from this machine.
A network error has occurred and
connection has failed.
The entered user name or pass-
word does not match that speci-
fied for LDAP server
authentication.
The number of search results has
exceeded the maximum number
of items that can be displayed.
A network error has occurred and
connection has failed.
The specified group contains
some destinations for sending by
e-mail and some destinations for
sending by Scan to Folder.
When a Message Appears
Solution
Wait until the message disap-
pears. Do not switch off the pow-
er while this message is
displayed. Depending on the
number of destinations to be up-
dated, there may be some delay
before you can resume operation.
Operations are not possible while
this message is displayed.
Contact the administrator.
or password.
Contact the administrator.
Try the operation once more. If
the message is still shown, the
network may be crowded. Check
the information of [System Set-
tings]. See "Administrator Tools",
General Settings Guide.
Make settings correctly for the
user name and the password for
LDAP server authentication.
Search again after changing the
search conditions.
Try the operation once more. If
the message is still shown, the
network may be crowded. Check
the information of [System Set-
tings]. See "Administrator Tools",
General Settings Guide.
To select destinations for sending
by e-mail, press [Select] for the
message displayed on the e-mail
screen. To select destination for
sending by Scan to Folder, press
[Select] for the message displayed
on the Scan to Folder screen.
3
23