Power Switch; Indicator Lights - Vulcan-Hart VMCS-101 Service Manual

VMCS HEAVY DUTY ELECTRIC GRIDDLE TOP - REMOVAL AND REPLACEMENT OF PARTS
Fig. 13
3. Reverse procedure to install.

POWER SWITCH

electrical power to the machine and
follow lockout / tagout procedures.
1. Remove TOP CONTROL BOX COVER.
2. Note wire locations and disconnect from switch
(1).
3. Pinch retaining clips and push switch (1) through
the opening.
Disconnect the
Page 7 of 19
Fig. 15
4. Reverse procedure to install.
NOTE: Ensure that terminal connections are
completely seated and tight.
5. Check for proper operation.

INDICATOR LIGHTS

electrical power to the machine and
follow lockout / tagout procedures.
1. Remove TOP CONTROL BOX COVER.
2. Note wire locations and disconnect from light (1)
being replaced.
Fig. 16
3. Pinch retaining clips and push light (1) through
the opening.
Disconnect the
F45571 (0316)