C24EA SERIES ELECTRIC CONVECTION STEAMERS - SWITCHES, SOLENOIDS, RELAYS AND BUZZER
SWITCHES, SOLENOIDS, RELAYS AND BUZZER
POWER AND DELIME SWITCHES
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
1.
Remove COOKING COMPARTMENT RIGHT
SIDE PANEL as outlined under Covers and
Panels.
2.
Locate switch on front panel.
LOWER COMPARTMENT SHOWN
3.
Disconnect electrical plug from the switch being
replaced.
4.
Remove switch from bezel on the front panel.
NOTE: If replacing the switch assembly (gaskets,
power and delime switches), remove the switch bezel
from the front panel.
5.
Reassemble parts removed in reverse order.
6.
Check steamer for proper operation.
Removal
1.
Remove COOKING COMPARTMENT RIGHT
SIDE PANEL as outlined under Covers and
Panels.
2.
Open cooking compartment door.
3.
Note electrical connections then disconnect lead
wires from switch.
Page 31 of 75
Fig. 51
DOOR SWITCH
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
F35453 Rev. A (0119)