Table of Contents
Advertisement
VMCS HEAVY DUTY ELECTRIC GRIDDLE TOP - REMOVAL AND REPLACEMENT OF PARTS
REMOVAL AND REPLACEMENT OF PARTS
REMOVE CLAMSHELL FROM
FRAME
electrical power to the machine and
follow lockout / tagout procedures.
Ensure clamshell and griddle are
cool to touch before servicing.
NOTE: This procedure requires two people to remove
clamshell.
1.
Place cardboard or other protective covering on
griddle surface to prevent scratching.
2.
Remove rear cover bolts.
NOTE: Junction box is secured to the bottom of rear
cover with screws and can remain attached.
Fig. 2
3.
Remove rear housing lid (1, Fig. 3) and rear cover
(2, Fig. 3).
F45571 (0316)
Disconnect the
Page 4 of 19
Fig. 3
4.
Loosen bump stop bolt (1, Fig. 4) and remove
screws (2, Fig. 4) from each side that secures
bump stop plate (3, Fig. 4) to rear housing.
Fig. 4
5.
One person fully raises clamshell by the handle
to remove spring force and hold in place. The
other person removes all 4 retaining clips from
the lower pivot rod at the rear housing.
Advertisement
Table of Contents
