Furuno FAR-3220-NXT Installation Manual page 8

SYSTEM CONFIGURATION
RADAR
MODEL
FAR-3x10
FAR-3x20
FAR-3x20-NXT
FAR-3x20W
FAR-3x30S
FAR-3x30SW
FAR-3x30S-SSD
Notes
1) The gyrocompass must be type approved for compliance with IMO resolution A.424(XI) (and/
or resolution A.821(19) for installation on HSC). The gyrocompass must also have an update
rate that is adequate for the ship's rate of turn. The update rate must be better than 40 Hz
(HSC) or 20 Hz (conventional vessel).
2) The EPFS must be type approved for compliance with IMO resolution MSC.96(72).
3) The monitors listed in the following table have been approved by the IMO.
If a different monitor is to be used on IMO vessels, its effective diameter must meet the appli-
cable Category requirements.
• CAT 1C and CAT 1HC: effective diameter of 320 mm or higher
• CAT 2C and CAT 2HC: effective diameter of 250 mm or higher
Category
CAT 1C and FURUNO
CAT 1HC
Hatteland Display
North Invent
CAT 2C and FURUNO
CAT 2HC
Hatteland Display
North Invent
For installation and operation of other monitors, see the respective manuals.
For BB types, a monitor unit is prepared by the user.
*: For use with radar only; do not use for Back-up ECDIS.
vi
Radar Component Combinations
ANTENNA
UNIT
XN12CF-RSB-128
XN20CF-RSB-128
XN24CF-RSB-128
XN20CF-RSB-130
XN24CF-RSB-130
SN24CF-RSB-129
SN30CF-RSB-129
SN36CF-RSB-129
SN36CF-RSB-131
SN24CF-RSB-133
SN30CF-RSB-133
SN36CF-RSB-133
Maker
TRANSCEIVER
UNIT
RTR-105
RTR-106
RTR-123
RTR-108
RTR-107
RTR-109
RTR-111
Model
MU-231
MU-231CE
MU-270W
JH23T12FUD*
JH23T14FUD
HD26T22 FUD
HD26T21 MMD
HD32T22 FUD
HD55T22 FUD
WA460-01.MON.01
MU-190
MU-201CE
JH19T14FUD
JH20T17FUD
HD24T22FUD
HD27T22FUD
WA270-01.MON.01
POWER SUPPLY
UNIT
PSU-014
PSU-014
PSU-015
PSU-016
PSU-018
Viewing distance
1.02 m
1.02 m
1.02 m
1.02 m
1.02 m
0.99 m
0.99 m
1.15 m
1.95 m
1.64 m
1.02 m
1.08 m
1.02 m
0.88 m
0.86 m
0.97 m
0.97 m