Furuno FAR-3220-NXT Installation Manual page 17

1.1.2 How to assemble the antenna unit
The antenna unit consists of the antenna radiator and the antenna unit chassis, and
they are packed separately. Fasten the antenna radiator to the antenna unit chassis
as follows:
1. Coat the hatched area shown below with the supplied adhesive.
2. Remove the protective waveguide cap from the waveguide on the radiator brack-
et.
3. Coat the threads of six hex bolts (M8 50, supplied) with the supplied adhesive.
Set the radiator to the radiator bracket.
Radiator
bracket
Do not apply the adhesive to these locations.
Remove this cap BEFORE
fastening the radiator.
Radiator
bracket
FRONT
1. INSTALLATION
Adhesive
REAR
1-3