Installing The Sfp Transceiver - Planet Networking & Communication GSD-1222VHP User Manual

3.3 Installing the SFP Transceiver

The sections describe how to insert an SFP transceiver into an SFP slot of the
802.3at PoE+ Switch.
The SFP transceivers are hot-pluggable and hot-swappable. You can plug in and
out the transceiver to/from any SFP port without having to power down the
802.3at PoE+ Switch, as the Figure 3-4 shows.
„ Approved PLANET SFP Transceivers
PLANET 802.3at PoE+ Switch supports both single mode and multi-mode SFP
transceivers. The following list of approved PLANET SFP transceivers is correct at
the time of publication:
Gigabit SFP Transceiver Modules
„ MGB-GT
„ MGB-SX
„ MGB-LX
„ MGB-L30
„ MGB-L50
„ MGB-L70
„ MGB-L120
„ MGB-LA10
„ MGB-LB10
„ MGB-LA20
„ MGB-LB20
„ MGB-LA40
„ MGB-LB40
34
Figure 3-4: Plug In the SFP Transceiver
SFP-Port 1000BASE-T Module
SFP-Port 1000BASE-SX mini-GBIC module - 550m
SFP-Port 1000BASE-LX mini-GBIC module - 10km
SFP-Port 1000BASE-LX mini-GBIC module - 30km
SFP-Port 1000BASE-LX mini-GBIC module - 50km
SFP-Port 1000BASE-LX mini-GBIC module - 70km
SFP-Port 1000BASE-LX mini-GBIC module - 120km
SFP-Port 1000BASE-LX (WDM,TX:1310nm) - 10km
SFP-Port 1000BASE-LX (WDM,TX:1550nm) - 10km
SFP-Port 1000BASE-LX (WDM,TX:1310nm) - 20km
SFP-Port 1000BASE-LX (WDM,TX:1550nm) - 20km
SFP-Port 1000BASE-LX (WDM,TX:1310nm) - 40km
SFP-Port 1000BASE-LX (WDM,TX:1550nm) - 40km
1
MGB-Series Module
2
LC Fiber Cable