Lennox iComfort G71MPP-03 Setup Manual page 3

DEALER NUMBER
Only the dealer number is required. Once the dealer number is entered, all other
fields such as dealer name, address, phone number, email and website will
automatically be filled in once the thermostat has been registered.
1. Use the arrows to scroll down to the Dealer Number setting. Press the edit
button.
2. Enter the Dealer Number using the on-screen keyboard (see figure 4). Press
save to continue.
NOTE: If a Dealer Number is not entered and the next button is selected, a pop-up
warning screen will appear (see figure 5).
3. Press yes to continue to the System Devices screen. Press no to return to
the system settings screen.
system settings
Time and Date
Daylight Saving Time
Circulate Fan ON
Time
Temperature Unit
System Name
Dealer Number
Dealer Name
Dealer Address
Dealer Phone
9:39 am Aug 15, 2012
Figure 4. Dealer Number Selection
system settings
Time and Date
Daylight Saving Time
Circulate Fan ON Time
Temperature Unit
System Name
Dealer Number
Dealer Name
Dealer Address
Dealer Phone
Parameter Name:
Time and Date
Daylight Saving Time
Circulate Fan ON time
Temperature Unit
System Name
Dealer Number
Dealer Name
Dealer Address
Dealer Phone
Dealer Email
Dealer Website
®
iComfort Wi-Fi
To adjust a setting, highlight it,
then press edit
current value:
edit
next
back
Table 1. System Settings
To adjust a setting, highlight it,
then press edit
9:39 am Aug 15, 2012
Default
—
Enabled
35%
Fahrenheit
—
****
Lennox
—
Note: When adding the dealer number, all other dealer fields will auto populate
1-800-9-LENNOX
—
www.lennox.com
Please enter your dealer number. If you do not enter your dealer
number, the thermostat will not show up on DaveNet and you will not
be able to monitor the systems status remotely or receive email alerts
when there is a problem.
The dealer number is your Lennox account number. Enter the entire
dealer number including the letters and numbers (.e. A12345). If you
do not know your dealer number, please contact your Lennox
Are you sure you want to proceed?
Figure 5. "Dealer Number" Warning
The following table lists all of the installer configurable system level parameters
available from the installer setup screens. After adjusting system settings, to
proceed, select next to continue.
current value:
edit
next
back
Parameter Value Setting
(Time/date elements screen)
Enabled, Disabled
Range 15 to 45%
Fahrenheit or Celsius
(keyboard input screen)
(keyboard input screen)
once thermostat registration is completed.
7-Day Programmable Communicating Thermostat
Page 3
WARNING
representative..
yes
no
Increment
—
—
1%
—
—
—
—
—
—
—
—