Distance to the MOB position will be displayed in the sub-function.
All you have to do is to keep calm and steer the boat in the indicated direction and
distance to pick up your wet crew member.
To reset the (MOB) function, press CLEAR.
The earlier calculated course (CMG) and the distance made good (DMG) is not
affected by the (MOB) function.
If the analogue steer pilot instrument is connected the analogue instrument will
indicate (MOB) course difference with priority to GPS position over dead reckoning
position.
Note: It is wise to practice this manoeuvre with the crew. Everyone in the crew
should be aware of the (MOB) routine. When you practice, it can be thoughtful to
use a fender instead of a crew member!!!
11 Customise your display
All sub-functions are organised in a list under the main-function. The first location in
the sub-function list is an empty display. You can have your favourite sub-function
moved in the same sub-function list, or copied and locked to any other page.
11.1 Move and lock a sub-function
Example: In SPEED page, move and lock the sub-function depth (DPT) to the top of
the sub-function list.
Select the SPEED page and find the sub-function depth (DPT). Press PAGE and SET
together.
All digits flash.
To move and lock the sub-function press SET.
Each time the SPEED page is selected, the sub-function (DPT) will be displayed at the
top of the sub-function list.
11.2 Copy and lock a sub-function
Example: Copy and lock the sub-function true wind speed (TWS) from WIND page to
SPEED page.
Select WIND page and find the sub-function (TWS).
Press PAGE and SET together.
All digits flash.
To move and copy to SPEED page, press PAGE.
To lock the function, press SET.
38