Steer Reference (Btw) - Furuno FI-301 Operator's Manual

Note: Steer reference heading value (MEM) can also be selected directly from the
optional trim button, without first selecting (MEM) in (Pilot OFF) function.
(Available from Server software version 1.9.)
8.3.3

Steer reference (BTW)

This function requires the FI-30 or NMEA compass transducer
and a NMEA navigator.
When selected, the function displays (BTW) and the analogue steer pilot instrument
displays the difference between the compass heading and the bearing to waypoint
(BTW).
The function can only be displayed if the connected navigator is navigating towards a
waypoint.
Since the displayed value it is controlled by the navigator, the value can not be altered.
Select sub-function (Pilot), press SET.
The text (OFF) or the last selected steer reference function flashes.
To select steer reference (BTW), press PLUS.
To activate the function, press SET. WP is shown on the display.
The sub-function (STR) automatically displays the stored (BTW) value.
30