Furuno FI-50 Series Brochure & Specs

COURSE
WIND CH WIND DIGITAL MULTI
PILOT
FI-501 FI-502 FI-503 FI-504 FI-505
Port
CAN bus ×2 ™ ™ ™ ™ ™
- - -
WIND ×1 ™ ™
Depth
Current depth - - -
™ ™
Shallow alarm threshold - - ™ ™ -
Deep alarm threshold - - ™ ™ -
Anchor shallow alarm threshold - - ™ ™ -
Anchor deep alarm threshold - - -
™ ™
Speed
STW (Speed through water) - - ™ -
™
SOG (Speed over ground) - - ™ ™ -
Maximum speed - - ™ ™ -
Average speed - - ™ ™ -
VMG to windward -
™ ™ ™ ™
Log (0 – 99999nm) - - ™ ™ -
Trip (0.01 – 999nm) - - ™ ™ -
Wind
Apparent wind speed ™ ™ ™ ™ -
Apparent wind angle ™ ™ ™ ™ -
True wind speed ™ -
™ ™ ™
True wind angle ™ ™ ™ ™ -
Beaufort scale angle ™ ™ ™ ™ -
Maximum wind speed ™ ™ ™ ™ -
Maximum true wind speed alarm -
™ ™ ™ ™
Low true wind speed alarm ™ ™ ™ ™ -
High apparent wind angle alarm ™ ™ ™ ™ -
Low apparent wind angle alarm ™ ™ ™ ™ -
- - - -
Ground wind direction ™
Heading
Heading - - -
™ ™
Average heading - - - ™ ™
Locked heading - - - ™ ™
Heading on next tack ™ ™ - ™ -
COG (Course over ground) - - -
™ ™
CMG (Course made good) - - - ™ -
DMG (Distance made good) - - - ™ -
ROT (Rate of turn) - - - - ™
Navigation
Bearing to waypoint - - - ™ -
Distance to waypoint - - - -
™
Cross Track Error and error steer bar - - - ™ -
Target waypoint name - - - ™ -
Target waypoint number - - - ™ -
Latitude - - - -
™
Longitude - - - ™ -
GPS satellite status - - - ™ -
Roll - - - ™ -
Pitching - - - ™ -
SOG - - ™ ™ -
Environment
Battery voltage - - ™ ™ -
Battery voltage alarm - - - ™ -
Date and time - - - ™ -
- - -
Water temperature (two decimal points) ™ ™
Air temperature - - ™ ™ -
Pressure - - ™ ™ -
Humidity - - ™ -
™
Wind chill temperature - - ™ ™ -
Dew point - - ™ ™ -
Timer
Count up timer - - ™ ™ -
Count down timer - - ™ ™ -
Autopilot
Rudder angle - - - ™ -
Engine
Fuel information - - - ™ -
Fuel consumption - - - ™ -
Engine RPM - - - ™ -
FURUNO ELECTRIC CO., LTD. FURUNO FRANCE S.A.S. FURUNO NORGE A/S
Nishinomiya, Hyogo, Japan Bordeaux-Mérignac, France Ålesund, Norway
Phone: +81 (0)798 65-2111 Phone: +33 5 56 13 48 00 Phone: +47 70 102950
Fax: +81 (0)798 65-4200, 66-4622 Fax: +33 5 56 13 48 01 Fax: +47 70 102951
FURUNO U.S.A., INC. FURUNO ESPAÑA S.A. FURUNO SVERIGE AB
Camas, Washington, U.S.A. Madrid, Spain Västra Frölunda, Sweden
Phone: +1 360-834-9300 Phone: +34 91-725-90-88 Phone: +46 31-7098940
Fax: +1 360-834-9400 Fax: +34 91-725-98-97 Fax: +46 31-497093
FURUNO (UK) LIMITED FURUNO DANMARK AS FURUNO FINLAND OY
Havant, Hampshire, U.K. Hvidovre, Denmark Espoo, Finland
Phone: +44 23 9244 1000 Phone: +45 36 77 45 00 Phone: +358 9 4355 670
Fax: +44 23 9248 4316 Fax: +45 36 77 45 01 Fax: +358 9 4355 6710
Instruments
RUDDER MULTI XL
FI-501/502/503/504/505/506
FI-506 FI-507
0.3 kg 0.7 lb
™ ™
Surface mount Flush mount
- -
49 1.9"
26 1.0"
110 4.3"
24 0.9"
-
™
- ™
- ™
- ™
-
™
Cutout for
Wind sensor connector
Wind sensor connector
surface mount
(FI-501/502 only)
(FI-501/502 only)
- ™
ø90 Hole Saw
- ™
- ™
- ™
60
2.4"
-
™
CAN bus connector CAN bus connector
- ™ 2–ø3.5
- ™
FI-507
0.5 kg 1.1 lb
- ™
- ™
Flush mount
Surface mount
- ™
26
23
1.0" 0.9"
- ™ 175 6.9"
4- ø3.5 4- ø3.5
145 5.7"
- ™
- ™
-
™
- ™
- ™ 160 6.3"
- ™
Cutout for
- CAN bus connector CAN bus connector
™
surface mount
-
™
- ™
60 2.4"
- ™
- ™
-
™
Wind Transducer
- ™
- ™ FI-5001 FI-5001L
- -
0.3 kg 0.7 lb 0.4 kg 0.9 lb
- ™ 80 3.1"
80 3.1"
- 7.5 55
™ 7.5 55
0.3" 2.2" 0.3" 2.2"
- ™
- ™
4–ø5 4–ø5
- ™
-
™
- ™ (30 1.2") 517 20.4"
(30 1.2")
- ™ 372 14.6" 70 2.8"
- ™
- ™
- ™
- ™
- ™
- ™
-
™
- ™
Depth/Speed/Temp Sensor Junction Box
- ™
DST-800 (Option) FI-5002 (Option)
- ™
0.9 kg 2.0 lb 0.3 kg 0.7 lb
- ™
- ™
ø75 2.94"
- ™
- ™
200 7.9"
™ ™ 220 8.7"
- ™
5
14
ø75 2.94" 0.19"
- ™
0.57"
- ™
TRADEMARK REGISTERED
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
09025U Printed in Japan
FURUNO POLSKA Sp. Z o.o.
Gdynia, Poland
Phone: +48 58 669 02 20
Fax: +48 58 669 02 21
FURUNO DEUTSCHLAND GmbH
Rellingen, Germany
Phone: +49 4101 838 0
Fax: +49 4101 838 111
FURUNO EURUS LLC
St. Petersburg, Russian Federation
Phone: +7 812 767 15 92
Fax: +7 812 766 55 52
49 1.9"
129 5.1"
10 17 0.7"
0.4"
Cutout for
flush mount
108 4.3"
118 4.6"
39 1.5"
10 17 0.7"
194 7.6"
0.4"
183 7.2"
Cutout for
flush mount
173 6.8"
183 7.2"
4- R5
865 34.1"
720 28.3" 145 5.7"
70 2.8"
2–ø5
52
2.0"
Catalogue No. M-1542d
www.furuno.com