Speed Functions; Speed Main-Function; Speed Sub-Functions; Trip Log (Trp) - Furuno FI-301 Operator's Manual

Multi control
Table of Contents

Advertisement

6

SPEED functions

6.1

SPEED main-function

Boat speed through the water.
Unit available in knots (KT), km/h (Kh) or miles/h (Mh) (See
12.1.2, C11). If a navigator is connected, speed over ground
(SOG) can be displayed. (See 12.6.11,C95).
6.2

SPEED sub-functions

6.2.1

TRIP LOG (TRP)

0-199,99 NM, only displayed in NM. Distance covered from power
on.
To reset TRIP LOG press CLEAR.
6.2.2

TOTAL LOG (LOG)

0-19999 NM, only displayed in NM. Can not be reset.
6.2.3

MAXIMUM SPEED (MAX)

Maximum speed since power on, or from reset of timer. To reset,
press CLEAR.
6.2.4

START TIMER (STA)

Count down timer from 59 to 1 minutes.
To start the timer from minus 10 minutes (-10'STA) press SET.
The figure 1 in 10 is flashing. If you want to start count down from
10 minutes, press SET.
If you want to start the timer from any other time (59 to 1 minute)
for example minus 5 minutes (-5'STA), press PAGE, MINUS and
PLUS as required to set 5 minutes and start the timer with SET.
When started, displays the count down time in minutes and
seconds.
During the last 10 seconds the alarm will sound once every
second.
6.2.5

TIMER

Elapsed time in hr/min/sec from power on, or from end of start
timer count down. To reset, press CLEAR.
6.2.6

AVERAGE SPEED (AVS)

Average speed from power on, or from reset of timer. To reset
press CLEAR.
6.2.7

DISTANCE (DST)

Covered distance from power on, or from reset of timer. To reset,
press CLEAR.
20

Advertisement

Table of Contents
loading

Table of Contents