Remote Control (Rem) - Furuno FI-301 Operator's Manual

7.3

Remote Control (REM)

The FI-30 Multi Control can be used to remote control other
digital FI-30 instruments.
All digital FI-30 instruments has their unique ID number on the
Nexus Network. At power up the ID numbers are displayed for a
short time.
The instrument to the right has ID number 16 (version number is
2.0)
Note the ID numbers for the instrument you want to remote control.
Press SET and the selected ID number is flashing.
Select the ID number for the instrument you want to control with
PLUS and MINUS as required. Press SET to start remote
control.
Four push button symbols are displayed to tell you are in remote
mode. The display of the instrument you selected will flash once
and then the PAGE symbol of that instrument will continue to flash
to tell it is remote controlled.
Now you can use the four push buttons:
To exit the remote control page, press CLEAR:
24