Table of Contents
Advertisement
4.2.4
SET
A press on SET unlocks a digit to access edit mode.
When unlocked, the digits are "active" (flashes) and can be edited by
pressing MINUS, PLUS and PAGE as required.
When finished editing, lock the digit by another press on SET.
4.2.5
Clear / cancel / reset
A press on CLEAR, clear digits, cancel alarms or resets the counters.
4.2.6
Calibration
To access calibration mode, press and hold SET more than 2 seconds.
To return to main-function mode, press SET when the text return (RET) is
shown.
4.2.7
Lighting
The instrument uses red back lighting for the display and the 4 push-buttons.
The lighting can be set at 4 different levels.
To quick access the light control, press and hold PAGE for more than 2
seconds. The flashing text (Lit OFF) will be displayed and the display will
be lit momentarily.
To select between the 4 light levels, Press PLUS: LOW, MED, MAX and OFF. To lock
the selected level press SET.
The selected light level will be copied to all FI-30 instruments connected to the system.
When the lighting is on, it is not possible to reduce or turn off the lighting on an
individual instrument.
18
2 sec
2 sec
Advertisement
Table of Contents
