Table of Contents
Advertisement
Each time the SPEED page is selected,
the sub-function (TWS) will be displayed.
The copied sub-function remains in its original location. It is only copied to a second
location, where it takes the place of the empty sub-function in the list.
Note: The sub-function damping (SEA) should not be moved, to avoid
misunderstanding.
11.3 Select power on function
The last selected combination of page and sub-functions according to your selection in
11.1 is the first page the instrument will display at power up.
11.4 Cancel a moved or locked sub-function
Example: To cancel the previous moved sub-function true wind speed (TWS) from
SPEED page.
Select the new combination, SPEED page and sub-function (TWS).
Press PAGE and SET together.
All digits flash.
To cancel the moved sub-function, press CLEAR.
The sub-function is cancelled and the main-function still flashes.
To return the to the original display, press SET.
11.5 Temporary locking of alternating functions
Some functions will alternate automatically between two functions.
Example bearing to waypoint (BTW) and distance to waypoint (DTW).
To stop alternating, press SET.
To continue alternating, press SET again.
39
Advertisement
Table of Contents
