Table of Contents
Advertisement
13.2.2 Fault - action
1. Speed and distance functions: No reading ( --- )
- C95 (COG) should be OFF, if no navigator is connected.
For more information, see manual for FI-30 Server.
Irregular values: Check the speed damping (SEA), (see 12.1.4).
2. Compass: No reading ( --- )
C75 should be OFF, if no NMEA compass is connected.
Make sure the (Auto DEV) routine is done correctly, (see 12.4.1)
Make sure the transducer is not mounted upside down.
The transducer cable should face down.
Make sure transducer is aligned correctly, (see 12.4.4).
For more information, see manual for FI-30 Server.
Irregular values: Check the compass damping (SEA), (see 12.3.12).
Make sure there are no ferrous items close to the transducer.
3. Wind: No reading ( --- )
C76 should be OFF, if no NMEA wind is connected.
For more information, see manual for FI-30 Server.
13.2.3 Error messages
The following error messages can appear on the display:
Nexus Network is missing, check colour coded connections
ERROR 2
No data received within a given time.
ERROR 3
Range error caused by bad format e.g. 17° 70' East.
ERROR 10
Remote command that can not be performed.
ERROR 11
No response from, or missing navigator.
ERROR 12
Waypoint not defined.
ERROR 13
Functions not allowed in autopilot mode.
ERROR 15
Automatic deviation not possible due to NMEA compass selected.
ERROR 16
Automatic deviation check failed. Turn not completed, error larger
ERROR 17
than 1,5°.
The boat probably hit a wave during turn. Error larger than 1,5°.
ERROR 19
If other error messages than the above appears on the Multi Control instrument,
contact your FURUNO dealer.
55
Advertisement
Table of Contents
