Table of Contents
Advertisement
Step 13: Continued
You will need for this page:
(QTY: 72)
(QTY: 30)
Continue to apply weather stripping.
12
Attach two(2) Roof Panels, one at a time, to Roof Beams using eight (8) screws
per Panel. Insert bolt and nut in middle hole where ribs overlap.
13
Attach Front Left and Right Roof Panels, one at a time, to Roof Beams using six
(6) screws per Panel. Insert bolt and nut in middle hole where ribs overlap.
14
Secure Front Roof Panels to Gables using seven (7) bolts and nuts per Gable.
15
Finish Weather Stripping the Roof and cut the tape just past the end of the Roof.
Fold end of tape under roof edge.
16
Attach Ridge Caps with four (4) bolts and nuts. DO NOT secure end of Ridge
Caps until Peak Caps are in place.
17
On both sides of the building, secure the bottom of Roof Panels to the Side Wall
Angles using screws.
Back
DO NOT fully tighten Ridge Cap bolts
until you have both Ridge Cap bolts in
place. This will ease assembly. Bolts must be fully
tightened before moving on to the next page.
1
6189
6188
Left Roof
Right Roof
Panel
Panel
6797
6538
6188
37
2
1
6538
Roof Panel
Ridge Cap
6797
6538
6797
6189
Front
DO NOT secure end of Ridge Caps
until Peak Caps are in place.
37BF
3
6797
Advertisement
Table of Contents
