Advertisement
Quick Links
Owner's Manual & Assembly Instructions
CV01
Model No. HM10867
709430218
Storage Area: 74 Sq. Ft.
6,9 m
2
BUILDING DIMENSIONS * Size rounded o to the nearest foot
*Approx.
Size
10' x 8'
121" x 92 3/4"
3,0 m x 2,3 m
307,3 cm x 235,6 cm
RMG108
WL10867
Missing Parts, Questions on Assembly?
Call: 1-800-851-1085 or
assist@arrowsheds.com
Do not return to dealer, they are not
equipped to handle your requests.
444 Cu. Ft.
12,6 m
3
Exterior Dimensions
Base
(Roof Edge to Roof Edge)
Size
Width
123 1/4"
313,1 cm
LM10867
RMW108
RMG108EU
WL10867L
CAUTION: SOME PARTS HAVE SHARP EDGES. CARE
MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES
TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ
SAFETY INFORMATION PROVIDED IN THIS MANUAL
BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES
WHEN HANDLING METAL PARTS.
Depth
Height
Width
95 1/4"
77 7/8"
118 1/4"
241,9 cm 197,8 cm
300,4 cm 228,6 cm 194,6 cm
RM108 A
VH108 A
RMG108Z
Interior Dimensions
(Wall to Wall)
Depth
Height
90"
76 5/8"
Door
Opening
Width
Height
55 1/2"
65"
141,0 cm 165,1 cm
Advertisement
Related Manuals for Arrow Storage Products HM10867
Summary of Contents for Arrow Storage Products HM10867
- Page 1 Owner's Manual & Assembly Instructions CV01 Model No. HM10867 LM10867 RM108 A RMG108 RMW108 VH108 A RMG108Z RMG108EU WL10867 WL10867L Missing Parts, Questions on Assembly? Call: 1-800-851-1085 or assist@arrowsheds.com Do not return to dealer, they are not equipped to handle your requests.
- Page 3 BEFORE YOU BEGIN..Owner's Manual Before beginning construction, check local building codes regarding footings, location and other requirements. Study and understand this owner's manual. Important information and helpful tips will make your construction easier and more enjoyable. Assembly Instructions: Instructions are supplied in this manual and contain all appropriate information for your building model.
-
Page 4: Tools And Materials
PLAN AHEAD..Watch the Weather: Be sure the day you select to install your building is dry and calm. Do not attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Teamwork: Whenever possible, two or more people should work together to assemble your building. - Page 5 SAFETY FIRST..Safety precautions are important to follow throughout the construction of your building. •Care must be taken when handling various •Practice caution with the tools being used in pieces of your building since some contain the assembly of this building. Be familiar with sharp edges.
- Page 6 CARE & MAINTENANCE..Finish: For long lasting nish, periodically clean and wax the exterior surface. Touch-up scratches as soon as you notice them on your unit. Immediately clean the area with a wire brush; wash it and apply touch-up paint per manufacturer's recommendation. Roof: Keep roof clear of leaves and snow with long handled, soft-bristled broom.
- Page 7 ACCESSORIES..FLOOR FRAME KITS ROOF STRENGTHENING (heavy snow load) KITS Extra roof beams and gable braces designed for added protection against heavy snow accumulation. Increases the strength of your roof. BEFORE AFTER ANCHOR KITS Model No. AK4 MODELS FB47410, FB5465, FB106-A Anchor Kit contains heavy-duty steel FB109-A and FB1014-A augers, 60' (18 m) of steel cable and...
- Page 8 ORDERING ACCESSORIES..02/13 We recommend that you purchase accessory items from your local storage building dealer whenever possible; however, because the full line of accessories is not always available from all dealers, Arrow is o ering them to you on a direct basis. There are two ways to order Arrow Storage Building Accessories: Option 1 Option 2...
- Page 9 Base The Base For Your Building No matter which of the options below you choose for a base, an ARROW ANCHORING KIT is recommended as an e ective method of properly securing your building after assembly is complete. OPTION 1: Directly on ground (earth) Assemble your building directly on level ground (grass, dirt, rock, sand, etc.).
- Page 10 Anchoring Anchoring Down The Building It is important that the entire oor frame be anchored after the building is erected. Below are recommended ways of anchoring. Anchoring into Wood/Post: Arrow Anchoring Kit: (Model No. AK4 or 60298) Use 1/4" (6 mm) Wood Screws. There are 1/4" (6 mm) Recommended for use with any suggested base.
- Page 11 Hardware Remove from bag of screws and save for the last step 65900A #10Bx1/2" (13 mm) 65923 65004 65103 Black Screw (8) #8-32x3/8" (10 mm) #8Ax5/16" (8 mm) #8-32 Hex Nut (161) (Packed with Screws) Bolt (161) Screw (326) 65109 66646 #8-32 Acorn Nut (4) 67468...
-
Page 12: Parts List
Parts List Assembly Part Part Quantity Check Key No. Number Description in Carton List 3719 Door Handle Brace 8200 Wall Panel (Side) 9374 Front Wall Panel 9365 Front Wall Channel 5986 Rear Wall Angle 6000 Right Gable 6001 Left Gable 10497 Horizontal Door Brace 6300... - Page 13 Assembly by Key No.
- Page 14 Step 1 8934 Ramp (1) Parts Needed For 9367 Front Floor Frame (2) Floor Frame Assemblies 8936 Rear Floor Frame (2) A14ctr 8937 Side Floor Frame (4) (13) 9367 The front oor frame is made up of 8934 three pieces. The side floor frames and the rear floor frame are made up of two pieces.
-
Page 15: Frame Assemblies
5986 Rear Wall Angle (2) Step 2 Parts Needed For 9917 Rear Wall Channel (2) Frame Assemblies 9922 Side Wall Channel (4) A15 ctr 8839 Side Wall Angle (4) 9917 9917 Rear Wall Channel 118 1/8" 300,0 cm The main frame pieces reinforce the walls. - Page 16 Step 3 Parts Needed For 10470 Roof Beam (8) Roof Beam Assemblies D16 ctr (30) 10470 The roof beams join the two gables and support the roof panels. The main roof beam is made up of four 10470 pieces overlapped back to back at the center.
- Page 17 Step 4 Parts Needed For 6403 Door Track Splice (1) Door Track Assembly 9366 Door Track (2) A17 ctr NOTE: Door Track Splice (painted part) 6403 The door track assembly supports the sliding doors and reinforces the front wall. It is made up of three pieces. Using the door track splice, (painted), join the door track (galvanized) pieces end-to-end as...
- Page 18 Step 5 Front Floor Assembly (1) Parts Needed For Side Floor Assembly (2) Floor Frame Rear Floor Assembly (1) A18ctr RIGHT REAR Assemble the four corners of 8937 the oor frame using two screws at each corner as shown. At the front corners fasten bolts through from the bottom with nuts on top.
- Page 19 Step 6 Parts Needed For 6627 Wall Panel (2) 9374 Front Wall Panel (2) Corners 8471 Corner Panel (4) U19 ctr Narrow Side 8471 (26) Wide Side NOTE REAR The remainder of the building assembly 8471 requires many hours and more than one person.
- Page 20 Door Track Assembly (1) Step 7 Rear Wall Angle Assembly (1) Parts Needed For Side Wall Angle Assemblies (2) Frames Rear Wall Channel Assembly (1) A20 ctr Side Wall Channel Assemblies (2) 5986 (30) Wall Angles The main frame pieces give rigidity to Must Face the side walls and provide a surface Inside...
- Page 21 Step 8 Parts Needed For 8200 Wall Panel (4) Wall Panels 6627 Wall Panel (4) V21 ctr STEP 6627 6627 (112) (17) 8200 The wall panels come in two widths. 6627 STEP Each wall panel has a crimped rib 8200 on one side.
- Page 22 Step 9 Parts Needed For 9370 Door Jamb (2) Front Channel/Door Jamb 9365 Front Wall Channel (2) U22 ctr 9365 (18) The door jambs reinforce the door STEP opening and provide an attractive trim. Follow these steps for both INSIDE OF door jambs.
- Page 23 Step 10 Parts Needed For 6000 Right Gable (2) 6001 Left Gable (2) Gable Assemblies 5971 Roof Beam Bracket (4) A23 ctr The gables go on top of the front and rear walls to support the roof beams. NOTE The gables are packed nested together and might be mistaken as one piece.
- Page 24 Step 11 Parts Needed For Left Gable Assemblies (2) Right Gable Assemblies (2) Gables/Braces 6635 Gable Brace (2) A24 ctr (20) Lift and fasten a right and left gable, under angle at corner, to the door track and rear wall angle with screws. Hint: On the rear gable, use a bolt and nut at the overlapping rear wall angle.
- Page 25 Step 12 Parts Needed For Main Roof Beam (1) Roof Beams Single Roof Beam (2) A25 ctr (12) STEP Spread the two halves of the main roof beam and fasten the roof beam to the gable brace of the front gable. Single Roof Beam Assembly Fasten the other end of the main roof beam to the gable brace of the...
- Page 26 Step 13 Parts Needed For 8468 Right Roof Panel (1) Right Roof Panel A26 ctr STEP 8468 8469 Installing the roof panels is best done with a step ladder. Begin installing 7483 7483 roof panels at the back right corner of the building.
-
Page 27: Roof Assembly
8468 Right Roof Panel (1) Step 14 Parts Needed For 8469 Left Roof Panel (2) Roof Assembly 7483 Roof Panel (2) A27 ctr 6529 Roof Panel (2) STEP STEP (19) (38) 8469 Left Roof Panel 7483 Roof Panel Install a left roof panel at the left Weather Stripping 7483 Roof Panel 6529 Roof Panel... - Page 28 Step 15 8840 Ridge Cap (1) Parts Needed For 7483 Roof Panel (2) Ridge Caps & Panels 8486 Ridge Cap (1) A28 ctr (16) (40) 8840 STEP Strips Install the rst ridge cap on the completed roof section using bolts and nuts.
- Page 29 Step 16 Parts Needed For 8485 Left Side Roof Trim (2) Roof Trim 8836 Right Side Roof Trim (2) A29ctr Attach the right and left side roof trim to the lower end of the roof panels on each side of the building using screws at each panel overlap.
-
Page 30: Door Assembly
3719 Door Handle Brace (2) Step 17 Parts Needed For 10477 Right and Left Doors (2) Door Assembly 10497 Horizontal Door Brace (4) U30 ctr 6300 Vertical Door Brace (2) (12) The steps on this page tell how to assemble the right door. You will per- form exactly the same procedures for 66045 the left door. - Page 31 Step 18 Parts Needed For Right Door Assembly (1) Door Installation & Adjustment Left Door Assembly (1) A31ctr Horizontal Door Brace Gable Door Track Door Slide From inside the building, put the bottom of the right door assembly (on your left when you are inside the building) behind door jamb into the front frame track.
- Page 32 HM10867 LM10867 RM108-A RMG108 RMW108 VH108-A WL10867 WL10867L RMG108Z RMG108EU CV32 Anchoring and Floor Frame Anchoring Anchor your building at this time. Floor Frame If you have purchased a Floor Frame Kit you need to install it at this time.