Arrow Storage Products RV101467H2 Owner's Manual & Assembly Manual page 26

Step 9: Door Jambs
You will need for this page:
(QTY: 8) (QTY: 4)
1 Secure Door Jambs with two (2)
screws in the top and bottom of each
Panel as shown.
2
Insert two (2) bolts and nuts into the
back side of each Panel as shown
below. Secure the bolts with both a
standard nut and an acorn nut.
3
Leave the holes in the center of each
Door Jamb open as shown below.
Bolt must go thru back side of Panel
or they may interfere with Door action.
2
9370
Door Jamb
Acorn nut should be visible from outside building.
Leave these holes open.
26
26AW