Arrow Storage Products RV101467H2 Owner's Manual & Assembly Manual page 35

Step 13: Continued
You will need for this page:
(QTY: 16)
Continue to apply weather stripping.
6
Attach two (2) Roof Panels using the
diagram to the right while assembling the
roof.
Attach Ridge Caps with two (2) bolts and
7
nuts. DO NOT secure end of Ridge Caps
until Peak Caps are in place.
Do not fasten the holes on the lower end
8
of the Panels. Double check that Panels
are installed in the correct position. The
part numbers listed in the Roof Panel Placement
diagram on page 33 must match the numbers
inked on the Panels.
DO NOT secure end of Ridge Caps
until Peak Caps are in place.
DO NOT fully tighten Ridge Cap bolts
until you have both Ridge Cap bolts in
place. This will ease assembly. Bolts must be fully
tightened before moving on to the next page.
(QTY: 8)
6797
6538
6797
2
6538 6797
Roof Panel Ridge Cap
FASTEN TO RIDGE CAP (NEXT TWO PAGES)
FASTEN TO NEXT PANEL WITH BOLT AND NUT
6797
6538
35
3
FASTEN TO ROOF BEAMS WITH SCREWS
DO NOT FASTEN AT THIS TIME
35BF