Advertisement
Quick Links
Owner's Manual & Assembly Instructions
C01et
Model No.
717500613
Storage Area: 27 Sq. Ft. 142 Cu. Ft.
2,5 m
2
BUILDING DIMENSIONS * Size rounded o to the nearest foot
*Approx.
Size
6' x 5'
74" x 57"
1,8 m x 1,4 m
188,0 cm x 144,8 cm
NW65
Missing Parts, Questions on Assembly?
Call: 1-800-851-1085 or
assist@arrowsheds.com
Do not return to dealer, they are not
equipped to handle your requests.
4,0 m
3
Exterior Dimensions
Base
(Roof Edge to Roof Edge)
Size
Width
76 1/4"
193,7 cm
Depth
Height
Width
59 1/2"
67 7/8"
71 1/4"
151,1 cm
172,4 cm
181,0 cm
RMG6560
CAUTION: SOME PARTS HAVE SHARP EDGES. CARE
MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES
TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ
SAFETY INFORMATION PROVIDED IN THIS MANUAL
BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES
WHEN HANDLING METAL PARTS.
Interior Dimensions
(Wall to Wall)
Depth
Height
54 1/4"
66 5/8"
137,8 cm
169,2 cm
Door
Opening
Width
Height
32"
58"
81,3 cm 147,3 cm
Advertisement
Related Manuals for Arrow Storage Products NW65
Summary of Contents for Arrow Storage Products NW65
- Page 1 Owner's Manual & Assembly Instructions C01et Model No. NW65 RMG6560 Missing Parts, Questions on Assembly? Call: 1-800-851-1085 or assist@arrowsheds.com Do not return to dealer, they are not equipped to handle your requests. 717500613 CAUTION: SOME PARTS HAVE SHARP EDGES. CARE MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES Storage Area: 27 Sq.
- Page 3 BEFORE YOU BEGIN..Owner's Manual Before beginning construction, check local building codes regarding footings, location and other requirements. Study and understand this owner's manual. Important information and helpful tips will make your construction easier and more enjoyable. Assembly Instructions: Instructions are supplied in this manual and contain all appropriate information for your building model.
-
Page 4: Tools And Materials
PLAN AHEAD..Watch the Weather: Be sure the day you select to install your building is dry and calm. Do not attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Teamwork: Whenever possible, two or more people should work together to assemble your building. - Page 5 SAFETY FIRST..Safety precautions are important to follow throughout the construction of your building. •Care must be taken when handling various •Practice caution with the tools being used in pieces of your building since some contain the assembly of this building. Be familiar with sharp edges.
- Page 6 CARE & MAINTENANCE..Finish: For long lasting nish, periodically clean and wax the exterior surface. Touch-up scratches as soon as you notice them on your unit. Immediately clean the area with a wire brush; wash it and apply touch-up paint per manufacturer's recommendation. Roof: Keep roof clear of leaves and snow with long handled, soft-bristled broom.
- Page 7 ACCESSORIES..FLOOR FRAME KITS ROOF STRENGTHENING (heavy snow load) KITS Extra roof beams and gable braces designed for added protection against heavy snow accumulation. Increases the strength of your roof. BEFORE AFTER ANCHOR KITS Model No. AK4 MODELS FB47410, FB5465, FB106-A Anchor Kit contains heavy-duty steel FB109-A and FB1014-A augers, 60' (18 m) of steel cable and...
-
Page 8: Special Note
ORDERING ACCESSORIES..02/13 We recommend that you purchase accessory items from your local storage building dealer whenever possible; however, because the full line of accessories is not always available from all dealers, Arrow is o ering them to you on a direct basis. There are two ways to order Arrow Storage Building Accessories: Option 1 Option 2... -
Page 9: Option 3: Concrete Slab
Base The Base For Your Building No matter which of the options below you choose for a base, an ARROW ANCHORING KIT is recommended as an e ective method of properly securing your building after assembly is complete. OPTION 1: Directly on ground (earth) Assemble your building directly on level ground (grass, dirt, rock, sand, etc.). - Page 10 Anchoring Anchoring Down The Building It is important that the entire oor frame be anchored after the building is erected. Below are recommended ways of anchoring. Anchoring into Wood/Post: Arrow Anchoring Kit: (Model No. AK4 or 60298) Use 1/4" (6 mm) Wood Screws. There are 1/4" (6 mm) Recommended for use with any suggested base.
- Page 11 Hardware Remove from bag of screws and save for the last step 65900A 65923 #10Bx1/2" (13 mm) 65004 #8-32x3/8" (10 mm) 65103 Black Screw (8) #8Ax5/16" (8 mm) #8-32 Hex Nut (61) Bolt (61) (Packed with Screws) Screw (176) 65109 66646 #8-32 Acorn Nut (6) 67468...
-
Page 12: Parts List
Parts List C12et Assembly Part Part Quantity Check Key No. Number Description in Carton List 5964 Roof Beam 5982 Roof Angle 5996 Right Gable 5997 Left Gable 6015 Side Roof Trim 6442 Right Roof Panel 6443 Left Roof Panel 10499 Horizontal Door Brace 6657 Door Handle Brace... - Page 13 Assembly by Key No. C13et...
- Page 14 Step 1 Parts Needed For 9396 Door Track (1) Door Track Assembly C14 ctr The door track assembly supports the sliding doors and reinforces the front wall. Hint: The holes in the top side of the door track are for fastening the gable to the top of the front wall in a later step.
- Page 15 Step 2 Parts Needed For 9403 Front Floor Frame (1) 9399 Rear Floor Frame (1) Floor Frame 9402 Side Floor Frame (2) RIGHT REAR 9402 Assemble the four corners of the 9399 oor frame using two screws at each 9402 corner as shown.
- Page 16 Step 3 Parts Needed For 9388 Front Corner Panel (2) 9392 Rear Corner Panel (2) Corners/Wall Panels 9364 Wall Panel (2) NOTE The remainder of the building assembly Narrow requires many hours and more than one Side person. Do not continue beyond this 9392 point if you do not have enough time to WideSide...
- Page 17 9397 Rear Wall Angle (1) Step 4 Parts Needed For 9925 Rear Wall Channel (1) 9926 Side Wall Channel (2) Frames 9400 Side Wall Angle (2) Door Track Assembly (1) The main frame pieces give rigidity to the side walls and provide a surface for attaching the gables which sup- port the roof.
- Page 18 Step 5 Parts Needed For 8995 Wall Panel (2) Wall Panels Fasten the wall panels at the top and bottom with screws. Crimped Rib Underneath Fasten the center of each panel to the wall channel with screws. Fasten overlapping ribs as before. STEP STEP 8995...
- Page 19 Step 6 Parts Needed For 9900 Door Jamb (2) Door Jamb The door jambs reinforce the door opening and provide an attractive STEP trim. Follow these steps for both door (3) bolts TOP VIEW jambs. Door Track Hex Nut Fasten a door jamb to the front panel with three bolts, nuts and Acorn Nut Plug...
- Page 20 Step 7 Parts Needed For 5996 Right Gable (2) Gable Assemblies 5997 Left Gable (2) AAI20 ctr The gables go on top of the front and rear walls to support the roof beams. STEP NOTE Edge Trim The gables are packed nested (Plastic Piece) together and might be mistaken as one piece.
- Page 21 Step 8 Parts Needed For 5996 Right Gable (2) 5997 Left Gable (2) Gables/Braces 6658 Gable Brace (2) C21et Lift and fasten a right and left gable, under angle at corner, to the door track with screws. STEP Gable Join the left and right gables 6658 Gable Brace together with a gable brace using a bolt in the bottom 2 holes.
- Page 22 Step 9 Parts Needed For 5964 Roof Beam (1) Roof Beam/Angle 5982 Roof Angle (1) C22et Fasten the roof beam, small holes on top, to the gable brace of the front STEP gable. Fasten the other end of the roof Roof Angle beam to the gable brace of the rear gable.
- Page 23 Step 10 Parts Needed For 6442 Right Roof Panel (1) Right Roof Panel C23et Installing the roof panels is best done with a step ladder. Begin installing roof panels at the back right corner of the building. Each screw and bolt in the roof requires a washer.
- Page 24 Step 11 Parts Needed For 6443 Left Roof Panel (1) Left Roof Panel C24et Install a left roof panel 6443 at the left rear corner of the roof. STEP 6443...
- Page 25 Step 12 Parts Needed For 6443 Left Roof Panel (1) Front of Roof 6442 Right Roof Panel (1) C25et Cover the joint at the peak with weather stripping tape. Unroll the tape and press it down over the opening at the ridge as you install each roof panel.
- Page 26 Step 13 Parts Needed For 6869 Ridge Cap (1) Ridge Cap/Roof Trim 6015 Side Roof Trim (2) C26et STEP Install the ridge cap on the com- Peak Cap pleted roof section using bolts and 6869 nuts. STEP Fasten the roof panel ribs, peak cap and ridge cap together using bolts and nuts.
-
Page 27: Door Assembly
Step 14 Parts Needed For 6657 Door Handle Brace (2) 10487 Right and Left Doors (2) Door Assembly 10499 Horizontal Door Brace (4) C27et The steps on this page tell how to assemble the right door. You will per- form exactly the same procedures for the left door. - Page 28 Step 15 Parts Needed For Right Door Assembly (1) Door Installation & Adjustment Left Door Assembly (1) C28et Horizontal Door Brace Gable Door Track Door Slide From inside the building, put the bottom of the right door assembly (on your left when you are inside the building) behind door jamb into the STEP STEP...
- Page 29 Anchoring and Floor Frame Anchoring Anchor your building at this time. Floor Frame If you have purchased a Floor Frame Kit you need to install it at this time.
- Page 30 SOME FACTS ABOUT RUST XA35 SOME FACTS ABOUT RUST 1. Avoid nicking or scraping the coating surface, Rusting is a natural oxidizing process that occurs inside and out. when bare metal is exposed to moisture. Problem areas include screw holes, unfinished edges, or 2.
- Page 31 NOTES GZ46...
- Page 32 NW65 RMG6560 C32et 717500613...