Arrow Storage Products RV101467H2 Owner's Manual & Assembly Manual page 19

Step 3: Continued
You will need for this page:
(QTY: 14)
4 Overlap two (2) Roof Beams so that bottom slots
align but DO NOT INSERT BOLTS. Next, overlap two
(2) more Roof Beams to form a second Roof Beam
Assembly. DO NOT INSERT BOLTS .
5 Place both Roof Beam Assemblies back-to-back to
form a Double Beam. Insert ten (10) bolts and nuts
as shown below.
6
Insert four (4) bolts and nuts into slots from bottom.
Check that the fi nished length of the Assembly is
159 3/8" (404,8 cm). Set aside for use in Step 12.
10386
10386
BUILD ONE (1) BEAM
Six (6) holes align.
Two (2) holes align.
CHECK THAT ALL ASSEMBLED PARTS ARE
THE CORRECT LENGTH BEFORE CONTINUING
4
10386
Roof Beam
Place two (2) bolts thru slots
on each side of the Beam.
10386
19
159 3/8" 404,8 cm
Finished Length
10386
End View of Double Beam
19BF