Advertisement
Quick Links
Owner's Manual & Assembly Instructions
EB01
Model No.
709450418
Storage Area: 43 Sq. Ft.
4,0 m
2
BUILDING DIMENSIONS * Size rounded o to the nearest foot
*Approx.
Size
8' x 6'
97 1/2" x 68 3/4"
2,4 m x 1,7 m
247,7 cm x 174,6 cm
HM8667
RMW86
RMG86EU
Missing Parts, Questions on Assembly?
Call: 1-800-851-1085 or
assist@arrowsheds.com
Do not return to dealer, they are not
equipped to handle your requests.
255 Cu. Ft.
7,2 m
3
Exterior Dimensions
Base
(Roof Edge to Roof Edge)
Size
Width
99 3/4"
253,4 cm
LM8667
VH86 A WL8667
RMG86Z
CAUTION: SOME PARTS HAVE SHARP EDGES. CARE
MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES
TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ
SAFETY INFORMATION PROVIDED IN THIS MANUAL
BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES
WHEN HANDLING METAL PARTS.
Depth
Height
Width
71 1/4"
74 7/8"
94 3/4"
181,0 cm 190,2 cm
240,7 cm 167,6 cm 187,0 cm
RM86 A RMG86
Interior Dimensions
(Wall to Wall)
Depth
Height
66"
73 5/8"
Door
Opening
Width
Height
43 1/2"
65"
110,5 cm
165,1 cm
Advertisement
Related Manuals for Arrow Storage Products HM8667
Summary of Contents for Arrow Storage Products HM8667
- Page 1 Owner's Manual & Assembly Instructions EB01 HM8667 LM8667 RM86 A RMG86 Model No. RMW86 VH86 A WL8667 RMG86EU RMG86Z Missing Parts, Questions on Assembly? Call: 1-800-851-1085 or assist@arrowsheds.com Do not return to dealer, they are not equipped to handle your requests.
- Page 3 BEFORE YOU BEGIN..Owner's Manual Before beginning construction, check local building codes regarding footings, location and other requirements. Study and understand this owner's manual. Important information and helpful tips will make your construction easier and more enjoyable. Assembly Instructions: Instructions are supplied in this manual and contain all appropriate information for your building model.
- Page 4 PLAN AHEAD..Watch the Weather: Be sure the day you select to install your building is dry and calm. Do not attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Teamwork: Whenever possible, two or more people should work together to assemble your building.
- Page 5 SAFETY FIRST..Safety precautions are important to follow throughout the construction of your building. •Care must be taken when handling various •Practice caution with the tools being used in pieces of your building since some contain the assembly of this building. Be familiar with sharp edges.
- Page 6 CARE & MAINTENANCE..Finish: For long lasting nish, periodically clean and wax the exterior surface. Touch-up scratches as soon as you notice them on your unit. Immediately clean the area with a wire brush; wash it and apply touch-up paint per manufacturer's recommendation. Roof: Keep roof clear of leaves and snow with long handled, soft-bristled broom.
- Page 7 ACCESSORIES..FLOOR FRAME KITS ROOF STRENGTHENING (heavy snow load) KITS Extra roof beams and gable braces designed for added protection against heavy snow accumulation. Increases the strength of your roof. BEFORE AFTER ANCHOR KITS Model No. AK4 MODELS FB47410, FB5465, FB106-A Anchor Kit contains heavy-duty steel FB109-A and FB1014-A augers, 60' (18 m) of steel cable and...
- Page 8 ORDERING ACCESSORIES..02/13 We recommend that you purchase accessory items from your local storage building dealer whenever possible; however, because the full line of accessories is not always available from all dealers, Arrow is o ering them to you on a direct basis. There are two ways to order Arrow Storage Building Accessories: Option 1 Option 2...
- Page 9 Base The Base For Your Building No matter which of the options below you choose for a base, an ARROW ANCHORING KIT is recommended as an e ective method of properly securing your building after assembly is complete. OPTION 1: Directly on ground (earth) Assemble your building directly on level ground (grass, dirt, rock, sand, etc.).
- Page 10 Anchoring Anchoring Down The Building It is important that the entire oor frame be anchored after the building is erected. Below are recommended ways of anchoring. Anchoring into Wood/Post: Arrow Anchoring Kit: (Model No. AK4 or 60298) Use 1/4" (6 mm) Wood Screws. There are 1/4" (6 mm) Recommended for use with any suggested base.
- Page 11 Hardware Remove from bag of screws and save for the last step 65900A #10Bx1/2" (13 mm) 65923 65004 Black Screw (8) #8-32x3/8" (10 mm) 65103 #8Ax5/16" (8 mm) (Packed with Screws) #8-32 Hex Nut (105) Bolt (105) Screw (266) 65109 66646 #8-32 Acorn Nut (6) 67468...
- Page 12 Parts List Assembly Part Part Quantity Check Key No. Number Description in Carton List 6615 Rear Wall Angle 6617 Door Track Splice 10498 Horizontal Door Brace 6658 Gable Brace 7875 Roof Panel 7906 Right Gable 7907 Left Gable 8461 Ridge Cap 8466 Right Roof Panel 8467...
- Page 13 Assembly by Key No. B13 ctr...
- Page 14 Step 1 8941 Ramp (1) Parts Needed For 9379 Front Floor Frame (2) Floor Frame Assemblies 9377 Rear Floor Frame (2) B14 ctr 9379 The front oor frame is made up of 8941 three pieces. The rear oor frame is made up of two pieces.
- Page 15 Step 2 Parts Needed For 6615 Rear Wall Angle (2) Frame Assemblies 9924 Rear Wall Channel (2) B15 ctr Rear Wall Channel 94 5/8" 240,3 cm 9924 The main frame pieces reinforce 9924 the walls. These pieces will later be installed in the center and at the top edge of the rear wall.
- Page 16 Step 3 Parts Needed For 8474 Roof Beam (1) Roof Beam Assembly 8476 Side Wall Angle (1) B16 ctr (10) The roof beams join the two gables and support the roof panels. The main roof beam is made up of two pieces fastened together.
- Page 17 Step 4 Parts Needed For 6617 Door Track Splice (1) Door Track Assembly 9378 Door Track (2) B17 ctr NOTE: Door Track Splice (painted part) The door track assembly supports the 6617 sliding doors and reinforces the front wall. It is made up of three pieces. Using the door track splice, (painted), join the door track 66769...
- Page 18 Step 5 Front Floor Assembly (1) Parts Needed For 8946 Side Floor Frame (2) Floor Frame Rear Floor Assembly (1) B18 ctr RIGHT REAR 8946 STEP 8946 9377 Assemble the four corners of the oor frame using two screws at each 8946 corner as shown.
- Page 19 Step 6 Parts Needed For 9382 Front Corner Panel (2) 9386 Rear Corner Panel (2) Corners T19 ctr Wide Side (14) 9386 Narrow Side NOTE The remainder of the building assembly STEP requires many hours and more than one REAR 9386 person.
- Page 20 Door Track Assembly (1) Step 7 Rear Wall Angle Assembly (1) Parts Needed For 8476 Side Wall Angle (2) Frames Rear Wall Channel Assembly (1) B20 ctr 9920 Side Wall Channel (2) 6615 (24) Wall Angles Must Face The main frame pieces give rigidity to Inside 9924 Building...
- Page 21 Step 8 Parts Needed For 6627 Wall Panel (4) Wall Panels 6915 Wall Panel (2) EB21 STEP 6915 6915 (82) (11) 6627 The wall panels come in two widths. 6627 STEP Each wall panel has a crimped rib on one side. The crimped rib should go under the rib of the panel that 6627 follows it.
- Page 22 Step 9 Parts Needed For 9370 Door Jamb (2) Door Jamb T22 ctr STEP (3) bolts TOP VIEW Door Track Hex Nut Acorn Nut Plug 9370 Bolt The door jambs reinforce the door opening and provide an attractive Plug trim. Follow these steps for both door jambs.
- Page 23 Step 10 Parts Needed For 7906 Right Gable (2) 7907 Left Gable (2) Gable Assemblies 7916 Roof Beam Bracket (4) B23 ctr The gables go on top of the front and rear walls to support the roof beams. NOTE The gables are packed nested together and might be mistaken as one piece.
- Page 24 Step 11 Left Gable Assembly (2) Parts Needed For Right Gable Assembly (2) Gables/Braces 6658 Gable Brace (2) B24 ctr (24) Lift and fasten a right and left gable, under angle at corner, to the rear wall angle with screws. Hint: On the rear gable, use a bolt and nut at the overlapping rear wall angle.
- Page 25 Step 12 Parts Needed For Main Roof Beam (1) Roof Beams 8474 Roof Beam (2) B25 ctr (12) Fasten the main roof beam to the STEP gable brace of the front gable. Fasten the other end of the main 8474 Roof Beam roof beam to the gable brace of the rear gable.
- Page 26 Step 13 Parts Needed For 8466 Right Roof Panel (1) Right Roof Panel B26 ctr STEP 8466 8467 Installing the roof panels is best done with a step ladder. Begin installing roof panels at the back right corner 7875 7875 of the building.
- Page 27 Step 14 Parts Needed For 8467 Left Roof Panel (2) 7875 Roof Panel (4) Roof Assembly 8466 Right Roof Panel (1) B27 ctr STEP STEP 8467 Left Roof Panel Weather Stripping Tape Roll (23) (38) 8466 Right Roof Panel Install a left roof panel at the left rear and right front corner of the roof.
- Page 28 Step 15 Parts Needed For 8461 Ridge Cap (1) Ridge Cap B28 ctr (20) Install the ridge cap on the completed roof section using bolts and nuts. Do not fasten the ends of the ridge cap at this time. STEP Fasten the lower end of the panels 8461 to the side wall angles using screws...
- Page 29 Step 16 Parts Needed For 8482 Side Roof Trim (2) Roof Trim B29 ctr Attach the side roof trim to the lower end of the roof panels on each side of the building using screws at each panel overlap. Using your thumb and index nger, overbend the bottom ange of the side roof trim at the corner inward enough so the right and left roof trim caps t...
- Page 30 Step 17 Parts Needed For 10479 Right and Left Doors (2) 10498 Horizontal Door Brace (4) Door Assembly 6300 Vertical Door Brace (2) T30 ctr (12) The steps on this page tell how to assemble the right door. You will perform exactly the same procedures for the left door.
- Page 31 Step 18 Parts Needed For Right Door Assembly (1) Door Installation & Adjustment Left Door Assembly (1) P31 ctr Horizontal Door Brace Gable Door Track Door Slide From inside the building, put the bottom of the right door assembly (on your left when you are inside the STEP STEP building) behind door jamb into the...
- Page 32 HM8667 LM8667 RM86 A RMG86 RMW86 VH86 A WL8667 RMG86EU RMG86Z EB32 Anchoring and Floor Frame Anchoring Anchor your building at this time. Floor Frame If you have purchased a Floor Frame Kit you need to install it at this time.