Advertisement
Quick Links
Owner's Manual & Assembly Instructions
CX01
Model No.
VL10662 A WL106
709100218
Storage Area: 54 Sq. Ft. 303 Cu. Ft.
5,0 m
2
BUILDING DIMENSIONS * Size rounded o to the nearest foot
*Approx.
Size
10' x 6'
121" x 68 3/4"
3,0 m x 1,7 m
307,3 cm x 174,6 cm
EH106 A
EH106BS A LM106AK
LM106SB
Missing Parts, Questions on Assembly?
Call: 1-800-851-1085 or assist@arrow-
Do not return to dealer, they are not
equipped to handle your requests.
8,6 m
3
Exterior Dimensions
Base
(Roof Edge to Roof Edge)
Size
Width
123 1/4"
313,1 cm 181,0 cm 185,1 cm
LM106
EH106EU A WL106EU
LM106T
sheds.com
CAUTION: SOME PARTS HAVE SHARP EDGES. CARE
MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES
TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ
SAFETY INFORMATION PROVIDED IN THIS MANUAL
BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES
WHEN HANDLING METAL PARTS.
Interior Dimensions
Depth
Height
Width
71 1/4"
72 7/8"
118 1/4"
300,4 cm
RMG10662
LM106GR
(Wall to Wall)
Depth
Height
66"
71 5/8"
167,6 cm 181,9 cm
141,0 cm
Door
Opening
Width
Height
55 1/2"
60"
152,4 cm
Advertisement
Related Manuals for Arrow Storage Products EH106A
Summary of Contents for Arrow Storage Products EH106A
- Page 1 Owner's Manual & Assembly Instructions CX01 Model No. EH106 A LM106 RMG10662 VL10662 A WL106 EH106EU A WL106EU EH106BS A LM106AK LM106GR LM106SB LM106T Missing Parts, Questions on Assembly? Call: 1-800-851-1085 or assist@arrow- sheds.com Do not return to dealer, they are not equipped to handle your requests.
- Page 2 GB: Assembly manual in additional languages available online. Scan QR code below to access. FR: Manuel de montage disponible en ligne dans d’autres langues. Pour y accéder, scannez le code QR ci-dessous. SP: Manual de montaje en idiomas adicionales disponible online. Escanee el código QR a continuación para acceder.
- Page 3 BEFORE YOU BEGIN..Owner's Manual Before beginning construction, check local building codes regarding footings, location and other requirements. Study and understand this owner's manual. Important information and helpful tips will make your construction easier and more enjoyable. Assembly Instructions: Instructions are supplied in this manual and contain all appropriate information for your building model.
- Page 4 PLAN AHEAD..Watch the Weather: Be sure the day you select to install your building is dry and calm. Do not attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Teamwork: Whenever possible, two or more people should work together to assemble your building.
- Page 5 SAFETY FIRST..Safety precautions are important to follow throughout the construction of your building. •Care must be taken when handling various •Practice caution with the tools being used in pieces of your building since some contain the assembly of this building. Be familiar with sharp edges.
- Page 6 CARE & MAINTENANCE..Finish: For long lasting nish, periodically clean and wax the exterior surface. Touch-up scratches as soon as you notice them on your unit. Immediately clean the area with a wire brush; wash it and apply touch-up paint per manufacturer's recommendation. Roof: Keep roof clear of leaves and snow with long handled, soft-bristled broom.
- Page 7 ACCESSORIES..FLOOR FRAME KITS ROOF STRENGTHENING (heavy snow load) KITS Extra roof beams and gable braces designed for added protection against heavy snow accumulation. Increases the strength of your roof. BEFORE AFTER ANCHOR KITS Model No. AK4 MODELS FB47410, FB5465, FB106-A Anchor Kit contains heavy-duty steel FB109-A and FB1014-A augers, 60' (18 m) of steel cable and...
- Page 8 ORDERING ACCESSORIES..02/13 We recommend that you purchase accessory items from your local storage building dealer whenever possible; however, because the full line of accessories is not always available from all dealers, Arrow is o ering them to you on a direct basis. There are two ways to order Arrow Storage Building Accessories: Option 1 Option 2...
- Page 9 Base The Base For Your Building No matter which of the options below you choose for a base, an ARROW ANCHORING KIT is recommended as an e ective method of properly securing your building after assembly is complete. OPTION 1: Directly on ground (earth) Assemble your building directly on level ground (grass, dirt, rock, sand, etc.).
- Page 10 Anchoring Anchoring Down The Building It is important that the entire oor frame be anchored after the building is erected. Below are recommended ways of anchoring. Anchoring into Wood/Post: Arrow Anchoring Kit: (Model No. AK4 or 60298) Use 1/4" (6 mm) Wood Screws. There are 1/4" (6 mm) Recommended for use with any suggested base.
- Page 11 Hardware Remove from bag of screws and save for the last step 65900A #10Bx1/2" (13 mm) 65923 65004 Black Screw (8) #8-32x3/8" (10 mm) #8Ax5/16" (8 mm) 65103 (Packed with Screws) Bolt (107) #8-32 Hex Nut (107) Screw (290) 65109 66646 #8-32 Acorn Nut (4) 67468...
- Page 12 Parts List Assembly Part Part Quantity Check Key No. Number Description in Carton List 5986 Rear Wall Angle 6403 Door Track Splice 10497 Horizontal Door Brace 6635 Gable Brace 6529 Roof Panel 6000 Right Gable 6001 Left Gable 3719 Door Handle Brace 8461 Ridge Cap 8468...
- Page 13 Assembly by Key No.
- Page 14 Step 1 8934 Ramp (1) Parts Needed For 9367 Front Floor Frame (2) Floor Frame Assemblies 8936 Rear Floor Frame (2) The front oor frame is made up of three pieces. The rear oor frame is 9367 made up of two pieces. The holes in these pieces will align when the pieces are positioned with correct 8934...
- Page 15 Step 2 Parts Needed For 5986 Rear Wall Angle (2) Frame Assemblies 9917 Rear Wall Channel (2) Rear Wall Channel 118 1/8" 300,0 cm 9917 The main frame pieces reinforce the walls. These pieces will later be 9917 installed in the center and at the top edge of the rear wall.
- Page 16 Step 3 Parts Needed For 8474 Roof Beam (1) Roof Beam Assembly 8476 Side Wall Angle (1) The roof beams join the two gables and support the roof panels. The main roof beam is made up of two pieces fastened together. Place the side wall angle, back- to-back, with a roof beam and fasten together using ten screws.
- Page 17 Step 4 Parts Needed For 6403 Door Track Splice (1) Door Track Assembly 9366 Door Track (2) NOTE: The door track assembly supports the Door Track Splice (painted part) sliding doors and reinforces the front wall. It is made up of three pieces. 6403 Using the door track splice, (painted), join the door track...
- Page 18 Step 5 Parts Needed For Front Floor Assembly (1) 8946 Side Floor Frame (2) Floor Frame Rear Floor Assembly (1) RIGHT REAR Assemble the four corners of 8946 the oor frame using two screws at each corner as shown. At the front STEP corners fasten bolts through from 8946...
- Page 19 Step 6 Parts Needed For 6515 Wall Panel (2) 9373 Front Wall Panel (2) Corners 8470 Corner Panel (4) Narrow NOTE Side The remainder of the building assembly 8470 requires many hours and more than one Wide Side person. Do not continue beyond this point if you do not have enough time to REAR complete the assembly today.
- Page 20 Door Track Assembly (1) Step 7 Rear Wall Angle Assembly (1) Parts Needed For 8476 Side Wall Angle (2) Frames Rear Wall Channel Assembly (1) 9920 Side Wall Channel (2) 5986 The main frame pieces give rigidity to the side walls and provide a surface for attaching the gables which sup- Wall Angles Must Face...
- Page 21 Step 8 Parts Needed For 6515 Wall Panel (6) Wall Panels Each wall panel has a crimped rib STEP on one side. The crimped rib should 6515 6515 go under the rib of the panel that follows it. 6515 6515 STEP Locate all of the wall panels and set each one alongside the building.
- Page 22 Step 9 Parts Needed For 9369 Door Jamb (2) Front Channel/Door Jamb 9365 Front Wall Channel (2) The door jambs reinforce the door opening and provide an attractive 9365 trim. Follow these steps for both door jambs. Fasten the front wall channels STEP in their positions between the end of the side wall channel and the corner...
- Page 23 Step 10 Parts Needed For 6000 Right Gable (2) 6001 Left Gable (2) Gable Assemblies 5971 Roof Beam Bracket (4) The gables go on top of the front and rear walls to support the roof beams. NOTE The gables are packed nested together and might be mistaken as one piece.
- Page 24 Step 11 Parts Needed For Left Gable Assemblies (2) Right Gable Assemblies (2) Gables/Braces 6635 Gable Brace (2) Lift and fasten a right and left gable, under angle at corner, to the door track and rear wall angle with screws. Hint: On the rear gable, use a bolt and nut at the overlapping rear wall angle.
- Page 25 Step 12 Parts Needed For Main Roof Beam (1) Roof Beams 8474 Roof Beam (2) Fasten the main roof beam to the gable brace of the front gable. STEP Fasten the other end of the main roof beam to the gable brace of the 8474 Roof Beam rear gable.
- Page 26 Step 13 Parts Needed For 8468 Right Roof Panel (1) Right Roof Panel STEP Installing the roof panels is best done with a step ladder. Begin installing roof panels at the back right corner 8468 8469 of the building. Each screw and bolt in the roof requires a washer.
- Page 27 Step 14 Parts Needed For 8469 Left Roof Panel (2) 6529 Roof Panel (4) Roof Assembly 8468 Right Roof Panel (1) STEP STEP 8469 Left Roof Panel Weather Stripping Install a left roof panel at the left Tape Roll rear and right front corner of the roof. 8468 Right Roof Panel Install a right roof panel at the left...
- Page 28 Step 15 Parts Needed For 8461 Ridge Cap (1) Ridge Cap Install the ridge cap on the com- pleted roof section using bolts and nuts. Do not fasten the ends of the ridge cap at this time. Fasten the lower end of the panels to the side wall angles using screws and washers.
- Page 29 Step 16 Parts Needed For 8482 Side Roof Trim (2) Roof Trim Attach the side roof trim to the lower end of the roof panels on each side of the building using screws at each panel overlap. Using your thumb and index nger, overbend the bottom ange of the side roof trim at the corner inward enough so the right and left roof trim caps t...
- Page 30 3719 Door Handle Brace (2) Step 17 Parts Needed For 10475 Right and Left Doors (2) 10497 Horizontal Door Brace (4) Door Assembly 6278 Vertical Door Brace (2) The steps on this page tell how to assemble the right door. You will per- form exactly the same procedures for the left door.
- Page 31 Step 18 Parts Needed For Right Door Assembly (1) Door Installation & Adjustment Left Door Assembly (1) Horizontal Door Brace Gable Door Track Door Slide From inside the building, put the bottom of the right door assembly (on your left when you are inside the building) behind door jamb into the STEP STEP...
- Page 32 EH106 A LM106 RMG10662 VL10662 A WL106 EH106EU A LM106SB WL106EU EH106BS A LM106AK LM106GR LM106T CX32 Anchoring and Floor Frame Anchoring Anchor your building at this time. Floor Frame If you have purchased a Floor Frame Kit you need to install it at this time. SOME FACTS ABOUT RUST 1.