Placing A Call On Hold - Canon MP 1000 User Manual

When a call comes in, the MultiPASS 1000 checks to see if the call is
from a telephone or fax machine.

Placing a Call on Hold

1.
2.
3.
While a call is on hold, the MultiPASS 1000 plays a melody. The
person on the receiving end hears the tune. To turn off the hold
melody, see Customizing MultiPASS 1000 Sounds on page 3-16.
Chapter 8
If the call is from a telephone, the machine rings to alert you
and the LCD displays:
TALK
If you do not pick up the handset within 22 seconds, the
ringing stops. To change the ring time, see Customizing the
FAX/TEL SWITCH Feature on page 7-20.
If the call is from a fax machine and the
function is set to , the MultiPASS 1000 does not ring. It
OFF
receives the document automatically.
To set the MultiPASS 1000 to ring whenever it receives a call,
whether from a fax machine or telephone, you use the
function; see page 7-18.
INCOMING RING
While talking on the telephone, press
The MultiPASS 1000 plays a melody over the line and the
light blinks.
ON HOOK
Return the handset to the cradle.
If you do not resume the call within about 3 minutes, the
line disconnects.
To take the call off hold and continue talking, simply lift the
handset or press again.
HOLD
Using the Telephone, an Answering Machine, and a Modem
INCOMING RING
.
HOLD
8-3