Canon MP 1000 User Manual page 85

2.
< >
3. Dial the number of the receiving fax.
4.
The MultiPASS 1000 begins sending the document.
Chapter 5
Press the arrow keys to change the density.
Press to darken the image and press
<
the image.
DOCUMENT READY
TEL = 12345678999
Use the numeric keypad to enter the number. See page 3-3
for details.
Press .
START/COPY
TRANSMITTING OK
The MultiPASS 1000 beeps once to indicate that the document
has been sent successfully.
If an error occurs during sending, the MultiPASS 1000 beeps
intermittently for a few seconds. If this happens, try sending
the fax again.
The MultiPASS 1000 automatically redials if the receiving
fax machine does not answer or if the line is busy. (You can
specify the number of times it redials; see Auto Redial, on
page 5-17.)
To stop sending before the fax is finished, press
may need to lift the operation panel to remove the document.
If so, be sure to close the operation panel and press
again.
If the light is flashing for any reason, correct the
ALARM
problem and then press
Troubleshooting.
to lighten
>
. If necessary, refer to Chapter 14,
STOP
Sending Fax Documents
. You
STOP
STOP
5-3