Table of Contents
Advertisement
The following table shows how this function works with the
FAX/TEL SWITCH
Settings
FAX/TEL SWITCH = OFF
INCOMING RING = OFF
FAX/TEL SWITCH = ON
INCOMING RING = OFF
FAX/TEL SWITCH = OFF
INCOMING RING = ON
or
FAX/TEL SWITCH = ON
INCOMING RING = ON
Customizing the FAX / TEL SWITCH Feature
When you plan to use the MultiPASS 1000 for both fax
communications and telephone calls, you set the
to
When you set the
options.
7-20
Receiving Fax Documents
setting:
. The
ON
FAX/TEL SWITCH
Change the amount of time the MultiPASS 1000 uses to check
incoming calls
Change the number of times the MultiPASS 1000 rings when it
receives a call
Set the MultiPASS 1000 to attempt to receive a fax or to
immediately disconnect after receiving a call
FAX/TEL SWITCH
RING START TIME
When a call comes in, the MultiPASS 1000 checks to see if it is a
person wanting to talk to you or a fax machine trying to send a
document. If your MultiPASS 1000 does not have enough time
to detect the fax tone, it assumes the call is from a telephone.
Use the
RING START TIME
MultiPASS 1000 takes to check whether a call is from a fax
machine or a telephone. You can select a ring start time from 0
to 30 seconds; the default is 8 seconds.
F/T RING TIME
When your MultiPASS 1000 is set to receive both fax and
telephone calls automatically, it rings to alert you to pick up
the handset if the call is from a person. If you do not pick up
the handset within a certain amount of time, the MultiPASS
1000 stops ringing. Use this option to change the number of
times the MultiPASS 1000 rings, from 15 to 300 seconds. The
default is 22.
Rings
The MultiPASS 1000 never rings.
The MultiPASS 1000 does not ring
when it receives a fax, but does
ring when it receives a telephone
call.
The MultiPASS 1000 rings to
alert you that a telephone call
is coming in.
FAX/TEL SWITCH
function also allows you to:
to
, you can also set these
ON
option to increase the time the
Chapter 7
Advertisement
Table of Contents
