Answering Machine, and a Modem
You can use the MultiPASS 1000 for telephone calls in one of three
ways: by itself with its built-in handset and keypad to make
telephone calls, with an answering machine connected to receive
phone messages, or with an extension telephone connected to make
calls or use for remote receiving. This chapter describes:
Using the Telephone
The procedures in this chapter are based on using your MultiPASS
1000's built-in telephone features on a shared fax/telephone line.
To make sure your MultiPASS 1000 is set up for a shared
fax/telephone line (
Making a Regular Dial Telephone Call
1.
2.
3.
4.
Chapter 8
Using the Telephone, an
Using the telephone
Using an answering machine
Using an extension telephone
Using a data modem
FAX/TEL SWITCH
Press
.
ON HOOK
TEL=
Enter the telephone number you wish to call using the numeric
keypad.
TEL=
12345678900
When the other party answers, lift up the handset.
If you get a busy signal, press
disconnect the line.
When you finish speaking, return the handset to the cradle to
disconnect the line.
Using the Telephone, an Answering Machine, and a Modem
Chapter 8
must be
), see page 7-4.
ON
or
to
ON HOOK
STOP
8-1