7.
8.
9.
10. Press
N
If your answering machine does not record at all or does not finish
recording the voice message, change the
When the
switches to automatic receiving only for fax machines that use
CNG (calling tone). Some fax machines (especially older models)
do not send a CNG tone. In this case, you need to set the
SWITCH
8-8
Using the Telephone, an Answering Machine, and a Modem
Press
.
START/COPY
ANS/FAX SWITCH TIME
Press the numeric buttons to enter the number of seconds you
want the MultiPASS 1000 to wait before switching to automatic
receiving.
You can choose from 1 to 99 seconds. The number of
seconds you choose must be less than the time it takes the
answering machine to hang up the phone after the caller
finishes leaving a message. (This will depend on the model
of the answering machine.)
In this example, the MultiPASS 1000 will switch to fax
mode after four seconds of silence.
Press
.
START/COPY
ANS/FAX SWITCH TIME
DATA ENTRY OK
.
STOP
ANS/FAX SWITCH
to
.
ON
4
ANS/FAX SWITCH
is set to
, the MultiPASS 1000
OFF
to
.
OFF
ANS/FAX
Chapter 8