Changing A Group Dialing Number - Canon MP 1000 User Manual

After scanning the document into memory, the MultiPASS 1000
automatically dials each number in the group. It dials the numbers
in the order that you registered them.

Changing a Group Dialing Number

Use these steps when you need to make group dialing changes to:
1. Follow the same steps that you would use to register the group
2.
< >
3.
4.
Chapter 6
If there is no group registered under the one-touch speed
dialing button or two-digit code, the LCD displays the
message. Make sure you entered the correct number and that
the group whose numbers you want to dial has been registered
correctly for group dialing.
If you make a mistake when dialing, press
again.
Add or delete numbers in a group
Change the name of the group
Cancel group dialing for a specific one-touch button or coded
dial code
dialing numbers and names.
See steps 1-5 starting on page 6-10.
Press the arrow buttons to display the one-touch or coded
speed dialing number that contains the group you want to
change.
GROUP DIAL
F08=GROUP DIAL
Press .
START/COPY
TEL= 2226663000
F16 JONES & ASSOC.
The MultiPASS 1000 displays the first speed dialing
number in the group.
If you want to add one-touch or coded speed dialing numbers
to the group, enter them now.
Follow the instructions starting with step 8 on page 6-11.
NO TEL #
. Then try
STOP
Using Automatic Dialing
6-13