Canon MP 1000 User Manual page 231

Message
NO RX PAPER
NO TEL #
POLLING ID ERROR
RECEIVED IN FILE
RECEIVED IN MEMORY
REC. PAPER JAM
Chapter 14
Error
code Cause
# 012 The other party's fax
is out of paper.
# 022 The automatic one-
touch speed dialing
button you pressed has
not been registered.
# 008 Other units cannot poll
your MultiPASS 1000
because the polling IDs
do not match.
# 021 You cannot poll the
other party's fax
because the polling IDs
do not match.
The MultiPASS 1000 is
in memory receiving
mode set by the
MultiPASS Desktop
Manager for Windows.
However, it cannot
upload the received
documents.
The paper or ink ran
out, or a paper jam
occurred, so the
MultiPASS 1000
received the document
in the memory.
# 009 The paper has jammed.
The paper cassette has
not been completely
inserted into the
MultiPASS 1000.
Action
Contact the other party and
have them install paper in
their fax.
Register the telephone
information before using
the one-touch speed dialing
button. See page 6-1.
Register your polling ID so
that it matches that of the
other unit, or set your polling
ID to 11111111. See page
10-16.
Register your polling ID so
that it matches that of the
other fax unit, or have the
other party set their polling ID
to 11111111. See page 10-16.
Check the connections on each
end of the parallel interface
cable. Make sure your
computer is turned on.
See page 7-8.
Add paper to the paper
cassette, change the ink
cartridge, or clear the
paper jam. To print out the
document from memory,
press and then press
STOP
. See page 7-7.
START/COPY
Clear the paper jam. See page
14-2.
Insert the paper cassette all
the way into the MultiPASS
1000, and then press
STOP
Troubleshooting
.
14-13