Receiving Documents Manually Using
an Extension Telephone
If your extension telephone is connected to the MultiPASS 1000 but
is not located near the unit, you can activate reception of a
document manually by answering the extension telephone without
physically touching the MultiPASS 1000.
For this feature, you must be using a touch-tone extension
telephone, and it must be plugged into the telephone jack of the
MultiPASS 1000. See Chapter 8 for details on Using an Extension
Telephone Connected to the MultiPASS 1000.
Setting Up the MultiPASS 1000 to Receive a Document
Manually Using an Extension Telephone
First set up the MultiPASS 1000 to receive a fax manually using a
remote receiving ID.
1.
2.
3.
<
>
4.
7-12
Receiving Fax Documents
Press
.
FUNCTION
SELECT MENU
Press
.
5
SELECT MENU
5.RX SETTINGS
Press
.
START/COPY
RX SETTINGS
1.ECM RX
Press the arrow buttons unti the following display appears.
RX SETTINGS
6.REMOTE RX
Chapter 7