Receiving Documents Automatically Over A Dedicated Fax Line - Canon MP 1000 User Manual

6.
< >
7.
8.
Receiving Documents Automatically Over
a Dedicated Fax Line
When the MultiPASS 1000 is set up for a dedicated line, it
automatically receives documents whenever a call comes over the
fax line.
N
The MultiPASS 1000 cannot receive automatically if you are
making copies, printing reports, or registering information.
1.
2.
ANS HOOK UP
MANUAL
The MultiPASS 1000 assumes all incoming calls are from another
fax machine sending a document. It receives the documents
automatically.
Chapter 7
Press the arrow buttons to change the setting to
FAX/TEL SWITCH
Press .
START/COPY
FAX/TEL SWITCH
DATA ENTRY OK
Press .
STOP
Make sure the MultiPASS 1000 is set to receive over a
dedicated fax line.
Press the
ANS HOOK UP/MANUAL
Make sure both the
off.
The MultiPASS 1000 receives documents in memory if the
paper runs out or if the ink cartridge runs out of ink. (See
Receiving Documents in Memory on page 7-7.)
To stop receiving before the document is complete, press
.
STOP
If the light is flashing for any reason, correct the
ALARM
problem and then press
Troubleshooting.
OFF
button.
and
ANS HOOK UP MANUAL
. If necessary, see Chapter 14,
STOP
Receiving Fax Documents
.
OFF
lights are
7-3