Product Line Cleaning - Cornelius ABS 2.0 Operator's Manual

ABS 2.0 Operator's Manual
Step
Carefully insert ice chute cover and slide down
to fully engage. Make sure cover side latches
5.
mate flush with ice chute base before sliding
down.
P L C
RODUCT INE LEANING
Step
Remove all of the quick disconnects from all of
1.
the BIB containers
2. Fill a suitable pail or bucket with soap solution
Submerge all of the "disconnects" (gas and
liquid) in the soap solution, then clean them
3.
using a nylon bristle brush (do not use a wire
brush). Rinse with clean, potable water.
Publication Number: 621058590OPR
Table 28. Ice Chute Cleaning
Action
Table 29. Product Line Cleaning
Action
Figure
Figure 81.
Figure
Figure 82.
Figure 83.
Figure 84.
- 40 - © 2019, Cornelius Inc.