Cornelius ABS 2.0 Operator's Manual page 55

Step
Slide the pre-cool condenser filter up to remove
3. it from the ABS. The filter is located on the front
of the chassis.
Using a warm solution of McD APSC solution
and a clean towel, clean the filter. Rinse the
4.
filter in luke warm water and shake off any
excess water.
Return the pre-cool condenser filter into its
5.
original position by sliding it down.
Turn the pre-cooler power switch to the on
6. position. This switch is located on the chassis
electrical box.
© 2019, Cornelius Inc.
Table 33. Condenser Filter Cleaning (Continued)
Action
- 51 -
ABS 2.0 Operator's Manual
Figure
Figure 126.
Figure 127.
Figure 128.
Figure 129.
Publication Number: 621058590OPR