Cornelius ABS 2.0 Operator's Manual page 47

Step
Rinse the nozzle components in lukewarm,
6.
clean water to remove soapy residue.
Spray sanitizer on the nozzle, diffuser, and
7.
gasket
8. Wipe the nozzle and diffuser with a soft cloth
9. Let air dry for 5 minutes
Reinstall the diffuser gasket in the diffuser by
aligning the square notch on the gasket and the
diffuser.
10.
NOTE: Ensure gasket is seated properly and
correct side is facing upwards.
© 2019, Cornelius Inc.
Table 30. Nozzle Cleaning (Continued)
Action
- 43 -
ABS 2.0 Operator's Manual
Figure
Figure 94.
Figure 95.
Figure 96.
Figure 97.
Figure 98.
Publication Number: 621058590OPR