Cornelius ABS 2.0 Operator's Manual page 51

Step
When ready press *START CIP PUMP* button,
open spray valve with a 90° turn and begin
spraying all around hopper and hard to reach
7.
corners. Spray until bucket is empty. Avoid
spraying directly into bottom of ice maker. Try to
spray both sides of agitator.
When finished press *STOP CIP PUMP* button
and close valve with a 90° clockwise turn. To
8.
avoid excessive wear to CIP pump, turn off
immediately after bucket is empty.
Put strainer hose in bucket of clean potable
9.
water. Make sure it reaches the bottom.
Open manual ice fill door and put the spray hose
inside the hopper. Make sure the valve is closed
10.
(handle perpendicular to valve).
When ready press *START CIP PUMP* button,
open spray valve with a 90° turn and begin
spraying all around hopper and hard to reach
11.
corners. Spray until bucket is empty. Avoid
spraying directly into bottom of ice maker. Try to
spray both sides of agitator.
© 2019, Cornelius Inc.
Table 31. Hopper Cleaning (Continued)
Action
- 47 -
ABS 2.0 Operator's Manual
Figure
Figure 111.
Figure 112.
Figure 113.
Figure 114.
Figure 115.
Publication Number: 621058590OPR