Conference Guide Settings; Displaying Conference Guide Status - Avaya B169 User Manual

Avaya B169 Conference Phone
CONFERENCE GUIDE

CONFERENCE GUIDE SETTINGS

When a multi-party call is going to be connected, a special signal (called flash or
R-pulse) is produced which transmits the command (enquiry, conference and return) to
the PBX. It may be necessary to change the type of signal if calls are connected via a
PBX. Different PBXs may require different signals. These requirements should be speci-
fied in the technical data for the PBX. Settings for the most common PBXs are listed on
Avaya's website.
 Select
 Enter the command for a enquiry for a new dialling tone and press OK to confirm.
("F" is the default setting.)
Enter the command to connect everyone to a multi-party call and press OK to

confirm. ("F3" is the default setting.)
 Enter the command to return to your original call and press OK to confirm. ("F1" is
the default setting.)
If you experience problems making multi-party calls
Your PBX may not be programmed to admit multi-party calls or the procedure may be
different. Please contact your telephone administrator or service provider.

DISPLAYING CONFERENCE GUIDE STATUS

Select

The display screen indicates the number of conference groups already stored plus how many
more groups can be added.
22
> CONF GUIDE > SETTINGS.
> CONF GUIDE > STATUS.
User Guide