Maintaining The Chassis; Checking The Machine For Loose Hardware; Maintaining The Sprayer System; Checking Sprayer System - Toro Spray Master Operator's Manual

Maintaining the Chassis

Checking the Machine for
Loose Hardware
Service Interval: Before each use or daily
1. Prepare the machine for maintenance; refer to
Preparing the Machine (page
2. Visually inspect machine for damaged or worn
parts, and check for loose hardware.
Note:
Before operating the machine, replace
any damaged parts and tighten all loose
hardware.
Maintaining the Sprayer
System

Checking Sprayer System

Service Interval: Every 50 hours
49).
71
1. Prepare the machine for maintenance; refer to
Preparing the Machine (page
2. Check all hoses, nozzles, and fittings for
damage and leaks.
Note:
Replace all damaged or leaking sprayer
components.
3. Check the nozzle strainers and in-line strainers
for accumulation of dirt and chemical sludge.
Note:
Clean or replace strainers with an
accumulation of dirt and chemical sludge.
49).