Lubricating The Caster-Axle Bearings; Greasing The Belt Tensioner - Toro Spray Master Operator's Manual

Lubricating the Caster-Axle
Bearings
Service Interval: Yearly
1. Prepare the machine for maintenance; refer to
Preparing the Machine (page
2. Connect a grease gun to the fitting in the hub of
the caster wheel
Figure 66
1. Grease fitting (caster-wheel hub)
3. Pump grease into the fittings until grease begins
to come out of the bearings.
4. Wipe up any excess grease.
5. Repeat steps 2 through
wheel.
49).
(Figure 66).
4 at the other caster

Greasing the Belt Tensioner

Service Interval: Monthly
1. Prepare the machine for maintenance; refer to
Preparing the Machine (page
2. At the bottom of the machine, wipe the grease
fittings at belt tensioner pivot clean with a rag
(Figure 67).
3. Connect a grease gun to the fittings
4. Pump grease into the fittings until grease begins
to come out of the bushings.
5. Wipe up any excess grease.
g314064
52
49).
Figure 67
(Figure
g312854
67).