Table of Contents
Advertisement
20.
On the [Network 1] tab, select [On] for [DHCP] to automatically obtain the IP address or
[Off] to specify the IP address manually.
If you have selected [On], proceed to Step 25.
21.
Enter the machine's IPv4 address in [IP Address].
22.
Enter the subnet mask in [Subnet Mask].
23.
Enter the gateway address in [Default Gateway Address].
24.
Click [OK].
25.
Wait until the machine restarts.
Setup is completed.
Connecting the Machine to a Wired Network
277
Advertisement
Table of Contents
Troubleshooting
