Network Settings - Ricoh SP 221S User Manual

7. Configuring the Machine Using the Control Panel

Network Settings

• Depending on the settings you change, the machine might need to be restarted.
• Depending on the model you are using, some items might not appear.
Ethernet
Item
MAC Address
Ethernet Speed Displays the current Ethernet speed
Set Ethernet
Speed
Wi-Fi
This function is available for only SP 277SNwX, SP 221SNw, SP 277SFNwX, and SP 221SFNw.
Item
Wi-Fi Enable
Wi-Fi Status
196
Description
Displays the machine's MAC address.
setting.
Specifies the speed for Ethernet
communication. Select a speed that
matches your network environment.
For most networks, the default setting is
the optimum setting.
Description
Select whether to enable or disable
Wireless LAN.
If [Disable] is set, [Wi-Fi Status], [MAC
Address], [Current Connection], [Input
SSID], [WPS] and [Wi-Fi Direct] are
not displayed.
Displays the current connection status.
Value
–
• 100Mbps Full Duplex
• 100Mbps Half Duplex
• 10Mbps Full Duplex
• 10Mbps Half Duplex
• Ethernet Unavailable
Appears when a network cable
is not connected.
• Auto Select
• 100Mbps Full Duplex
• 100Mbps Half Duplex
• 10Mbps Full Duplex
• 10Mbps Half Duplex
Default: [Auto Select]
Value
• Disable
• Enable
Default: [Disable]
–